Tag Archives: bearing

China Professional Agricutural Axle – 6t 8t Agricutural Trailer Axle Sales axle bearing

Product Description

Agricutural axle – 6T 8T Agricutural trailer axle sales
1. ourboard-drum
2.round beam or square beam
3.Mobil Grease
4.ABS and T30 brake chamber

Main products :
Germany Axle, English Axle, American Axle, Bogie Suspension, half axle, Suspension 
parts, fifth wheel, kingpin and other trailer parts.

Jin Xihu (West Lake) Dis. semitrailer axle produced by the company, has reasonable structure, good braking quality, high-intensity, big rigidity, long life, as well as strong bearing capacity, and also passed the national authoritative department’s monitor: The fatigue life reaches 1.5 million times without damage, which surpasses national standard. At present, the annul productive ability of Jin Xihu (West Lake) Dis. semitrailer axle has surpassed 10 thousands, widespread using in domestic and overseas, and selling in distant markets in Malaysia, Germany, US, Ecuador and so on.

Products features:
1.Special heat-treat,low alloy steel axle beam,it has the vitues of good synthetic 
performance,strong loadabilityand lower self weight;
2.High quality alloy solid iserted spindle,through wholy heat treatment,provide
 superior fatigue capacity;
3.High performance premium non-asbstos brake linings,extend service life;
4.Easy for ABSinstallation;
5.Camshaft,maching with special seals,can ensure no entry of the grease into the brake 
drum,more safety;
6.New tight fit hub cap have O rings,high property for sealing;
7.Grease lubricant is supplied by Mobil that lengthens the time of free maintenance;

8.Full range of stud fixing such as ISO,BSF,and JAP,it can meet the requirements of various wheel rims.
We have 7 types of axles

  1. American type axles (Inboard type and outboard type )
  2. Germany type axles ( Wheel type and spider type )
  3. English type axles ( 8 holes, 10 holes / ISO BSF JAP )
  4. Lowbed axles / concave axles
  5. Agricultural axles ( With brake, Without brake, Stub axles )
  6. Steering axles

Q1:Are you a factory? 
A:Yes,we are a factory,but not just a factory,as we have sales team,our own offices,and they
all can help the buyers and cooperative partners to decide which products are the best choices
for them,and all your requirements and inquires will be replyed in time.  

Q2:What’s your Delivery Time?

A:In general, the delivery time is 15-20 days.We will make the delivery as soon as possible with
the guaranted quality.

Q3:What is the convenient way to pay?
A:L/C , T/T,Unionpay,DP are accepted,and if you have a better idea , please be free sharing with us.

Q4:Which type of shipping would be better?
A:Generally,in consideration of the cheap and safe superiorities of sea transportation,we advice
to make delivery by sea.What’s more, we respect your views of other transportation as well.

 

JLB Agriculture Axle Specification
Type Brake Size(mm) Wheel Stud PCD(mm) Bearing Track Length(mm) Beam Size(mm) Max Capacity(T)
JLB0806T 300*100 8*M20*1.5 ISO 275 32211 33014 1800 80*80 8
JLB0606T 300*100 6*M20*1.5 ISO 275 33118 33213 1840 60*60 6

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Condition: New
Axle Number: 1
Application: Trailer
Certification: ISO
Material: Steel
Type: Semi-Trailer
Customization:
Available

|

Customized Request

axle

Can you provide insights into the maintenance of axle bearings for smooth operation?

Maintaining axle bearings is essential for ensuring smooth operation, longevity, and optimal performance of a vehicle’s axle system. Here are some insights into the maintenance of axle bearings:

1. Regular Inspection:

Perform regular visual inspections of the axle bearings to check for any signs of wear, damage, or leaks. Look for indications such as excessive play, unusual noises, vibration, or leakage of grease. Inspections should be carried out as per the manufacturer’s recommended intervals or during routine maintenance checks.

2. Lubrication:

Adequate lubrication is crucial for the smooth operation of axle bearings. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for greasing. Over-greasing or under-greasing can lead to bearing damage or failure. Ensure that the proper amount of grease is applied to the bearings, and use a high-quality grease that is compatible with the axle bearing specifications.

3. Seal Inspection and Replacement:

Check the condition of the axle bearing seals regularly. The seals help to keep contaminants out and retain the lubricating grease within the bearing. If the seals are damaged, worn, or show signs of leakage, they should be replaced promptly to prevent dirt, water, or debris from entering the bearing assembly and causing damage.

4. Proper Installation:

During axle bearing replacement or installation, it is crucial to follow proper procedures to ensure correct seating and alignment. Improper installation can lead to premature bearing failure and other issues. Refer to the manufacturer’s instructions or consult a professional mechanic to ensure proper installation techniques are followed.

5. Load Capacity and Alignment:

Ensure that the axle bearings are properly sized and rated to handle the load capacity of the vehicle and the specific application. Overloading the bearings can lead to excessive wear and premature failure. Additionally, proper wheel alignment is important to prevent uneven bearing wear. Regularly check and adjust the wheel alignment if necessary.

6. Environmental Considerations:

Take into account the operating conditions and environment in which the vehicle is used. Extreme temperatures, exposure to water, dirt, or corrosive substances can affect the performance of axle bearings. In such cases, additional preventive measures may be necessary, such as more frequent inspections, cleaning, and lubrication.

7. Professional Maintenance:

If you are unsure about performing maintenance on axle bearings yourself or if you encounter complex issues, it is recommended to seek assistance from a qualified mechanic or technician who has experience with axle systems. They can provide expert advice, perform necessary repairs or replacements, and ensure proper maintenance of the axle bearings.

By following these maintenance insights, you can help ensure the smooth operation, longevity, and reliability of axle bearings, contributing to the overall performance and safety of the vehicle.

axle

Where can I purchase high-quality replacement axles for my make and model of vehicle?

When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:

  1. Authorized Dealerships:
  2. Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.

  3. Independent Auto Parts Stores:
  4. Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.

  5. Online Retailers:
  6. Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.

  7. Specialty Performance Retailers:
  8. If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.

  9. Local Salvage Yards:
  10. Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.

  11. Vehicle Manufacturer’s Online Parts Store:
  12. Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.

When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.

axle

What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?

Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:

  1. Unusual Noises:
  2. If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.

  3. Vibrations:
  4. A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.

  5. Uneven Tire Wear:
  6. Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.

  7. Difficulty Steering:
  8. A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.

  9. Visible Damage or Leaks:
  10. Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.

  11. Professional Inspection:
  12. If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.

It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.

China Professional Agricutural Axle - 6t 8t Agricutural Trailer Axle Sales   axle bearingChina Professional Agricutural Axle - 6t 8t Agricutural Trailer Axle Sales   axle bearing
editor by CX 2024-02-09

China Hot selling Sdcx Brake Pad D1852-9081 / 04465-Wb001 / Day4-33-28za / Day5-33-28za / Day6-33-28z /D3170 Front Axle for CZPT Yaris R 2016- axle bearing

Product Description

  Ulter-quiet design, no noise and no dust exists. We give you the best driving experience!

 

Company Profile

   
    ZheJiang Changxu Auto Parts Co., Ltd. is a leading manufacturer and distributor of automotive brake system parts. The company is committed to developing into an industry leader, keeping up with the changes of new models in the market, using advanced equipment to adjust the types of brake pads and brake discs, and completing mold development in as little as 2 weeks. Our company can guarantee the first-class quality, and the brake pads and brake discs we produce have passed the dual domestic and international certifications such as TUV, BV, SGS, TS16949, etc. And have received a good reputation at home and abroad. Our company also has a scientific inventory management system, with sufficient stock, and can guarantee rapid delivery in about 20 days to improve efficiency for you. In the future, we will continue to expand the scale of our plant, update the brake pads and brake discs, and continue to serve our customers with integrity.
 

OUR STRENGTH

 

Follow-up new type of cars!

Looking for the brake pad of the new type of cars on the market? We have them all! We can ensure to follow up the types of new brake pads and baking plate on the market in a timely manner. The mold development cycle is short, and the multi-level needs of customers can be met.

Products spreaded in whole world

Our products have been sold to more than 70 countries in the world, covering Asia, South America, North America, Africa and Europe. In the future, more and more countries will cooperate with us. We look forward to your becoming 1 of them as soon as possible.

 

Detailed catalogue

Super full product catalog! There is always 1 right product for you! We have a detailed catalogue that is superior to that of the same industry and is simple and easy to obtain. It can be obtained by clicking the link below. You are welcomed to inquire!

 

EXHIBITION

 

PRODUCTION DETAILS

 

 

PRODUCTIONS ADVANTAGES

 

First-class quality

Double certification and bunch of quality inspection are only for the most reassuring brake pads! The brake pads and baking plate produced by our company have passed the domestic and international certification of 3C, TUV, BV, SGS, TS16949, etc.

 

Environmental protection of materials

Our brake pads ensure your safety and health! The brake pad is made of environment-friendly ceramic material, which has less dust and powder during friction, and will not make the driver inhale dust, so as to effectively protect the driver’s health.

 

No noise

Super quiet design, no abnormal noise! The chamfer design carried out by a professional team can effectively prevent abnormal brake noise and improve the driving experience of drivers.

 

CUSTOMER REVIEWS

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Type: Brake Pads
Material: Ceramic Fiber
Position: Front
Certification: ISO/TS16949, ISO13485, ISO14001, BSCI, IATF-16949, ISO9001, ISO9002, AMECA, DOT, ECE, FSC, HACCP, GSV, GMP
Samples:
US$ 5/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

Where can I find information on axle load limits for various types of vehicles?

When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:

1. Vehicle Owner’s Manual:

The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.

2. Government Transportation Authorities:

Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.

3. Commercial Vehicle Regulations:

If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.

4. Vehicle Manufacturer or Dealer:

If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.

5. Online Resources and Databases:

There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.

When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.

axle

Can you recommend axle manufacturers known for durability and reliability?

When it comes to choosing axle manufacturers known for durability and reliability, there are several reputable companies in the automotive industry. While individual experiences and preferences may vary, the following axle manufacturers have a track record of producing high-quality products:

1. Dana Holding Corporation: Dana is a well-known manufacturer of axles, drivetrain components, and sealing solutions. They supply axles to various automotive manufacturers and have a reputation for producing durable and reliable products. Dana axles are commonly found in trucks, SUVs, and off-road vehicles.

2. AAM (American Axle & Manufacturing): AAM is a leading manufacturer of driveline and drivetrain components, including axles. They supply axles to both OEMs (Original Equipment Manufacturers) and the aftermarket. AAM axles are known for their durability and are often found in trucks, SUVs, and performance vehicles.

3. GKN Automotive: GKN Automotive is a global supplier of driveline systems, including axles. They have a strong reputation for producing high-quality and reliable axles for a wide range of vehicles. GKN Automotive supplies axles to various automakers and is recognized for their technological advancements in the field.

4. Meritor: Meritor is a manufacturer of axles, brakes, and other drivetrain components for commercial vehicles. They are known for their robust and reliable axle products that cater to heavy-duty applications in the commercial trucking industry.

5. Spicer (Dana Spicer): Spicer, a division of Dana Holding Corporation, specializes in manufacturing drivetrain components, including axles. Spicer axles are widely used in off-road vehicles, trucks, and SUVs. They are known for their durability and ability to withstand demanding off-road conditions.

6. Timken: Timken is a trusted manufacturer of bearings, seals, and other mechanical power transmission products. While they are primarily known for their bearings, they also produce high-quality axle components used in various applications, including automotive axles.

It’s important to note that the availability of specific axle manufacturers may vary depending on the region and the specific vehicle make and model. Additionally, different vehicles may come equipped with axles from different manufacturers as per the OEM’s selection and sourcing decisions.

When considering axle replacements or upgrades, it is advisable to consult with automotive experts, including mechanics or dealerships familiar with your vehicle, to ensure compatibility and make informed decisions based on your specific needs and requirements.

axle

What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?

Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:

  1. Unusual Noises:
  2. If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.

  3. Vibrations:
  4. A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.

  5. Uneven Tire Wear:
  6. Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.

  7. Difficulty Steering:
  8. A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.

  9. Visible Damage or Leaks:
  10. Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.

  11. Professional Inspection:
  12. If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.

It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.

China Hot selling Sdcx Brake Pad D1852-9081 / 04465-Wb001 / Day4-33-28za / Day5-33-28za / Day6-33-28z /D3170 Front Axle for CZPT Yaris R 2016-   axle bearingChina Hot selling Sdcx Brake Pad D1852-9081 / 04465-Wb001 / Day4-33-28za / Day5-33-28za / Day6-33-28z /D3170 Front Axle for CZPT Yaris R 2016-   axle bearing
editor by CX 2024-01-09

China OEM Domi 3 Axles 4 Axle 40-60 Tons Lowboy Lowbed Truck Transport Gooseneck Lowbed Trailer Lowbed Trailer Lowboy Axle axle bearing

Product Description

Product Description

 

DOMI Heavy Duty Multi Function 40ft 3 axle 4 Axle 80-2m2 and has more than 300 employees. It is the “bulletin” enterprise of the Ministry of industry and information. 

Main business contains semi-trailer truck, glass reinforced plastic CZPT truck, aluminum alloy truck, Bat semi-trailer, container transportation semi-trailer, van type semi-trailer, self-unloading semi-trailer and so on. 

Company business is mainly engaged in the production of kinds of trailer and spare parts, meanwhile, we provide technical support and customization, aims to make the best needed trailer for customers worldwide. 
 

We have been in truck trailer field for more than 20 years.
Our products are famous in aftermarket.
We’ve export to Europe, South America, South Africa and Southeast Asia;
We’ve passed ISO9001:2000 & BV & SGS & CCC certificates;
We’ve set up unified technical departments and testing standards.

FAQ

1. What are our advantages compared with other competitors?

√√ Competitive Good Quality — We’re trading company with factory. We have a series of advanced equipment including, such as auto riveting production line, laser cutting system,coating line,etc.In addition,we have obtained ISO9001 & CCC certificates & SGS certificates.

From numerous comparison and feedback from clients, our quality and sevice are more competitive than other competitors.

√√ Quick Response–
Our team is consisted of a group of diligent and enterprising people, working 24/7 to respond client inquiries and questions all the time. Most problems can be solved within 12 hours.

√√ Fast delivery —
Normally it will take more than 25-45 days for other companies to produce the ordered trailers, while we have a variety of resources, locally and nation widely, to receive trailers in timely manner. In 70% circumstance, we can have a 15-20 days delivery of regular trailers for our clients.
 
2. Which payment terms can we accept?
 
Normally we can work on T/T term or L/C term.

√√ On T/T term, 30% down payment is required in advance, 70% balance shall be settled before delivery, or against the copy of original B/L for regular client.
√√ On L/C term, normally need 30% down payment by T/T, 70% by L/C at sight. a 100% irrevocable L/C without “soft clauses” can be accepted sometimes. Please seek the advice from the individual sales manager whom you work with.
 
3. How long will our price be valid?
 
√√ Price with long valid time —
We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year. We only adjust our price based on 2 situations:
The rate of USD:RMB varies significantly according to the international currency exchange rates.
Manufacturers/factories adjusted the trailer price, because of the increasing labor cost and raw material cost.
 
4. What logistics ways we can work for shipment?
 
We can ship all trailer by various transportation tools.

√√For 90% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc, either by container or RoRo/Bulk Shipment.
√√For neighborhood countries of China, such as Russia, Tajikistan, Kazakhstan,Mongolia etc, we can ship trucks by road or railway.
√√ For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex.
 

 

Type: Semi-Trailer
Load Capacity: 80T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Tread: 2240mm
Grade: Heavy Duty
Types of Suspension Systems: Trailing Arm Type
Samples:
US$ 10000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

Are there guidelines for choosing the right axle for towing heavy loads?

When it comes to towing heavy loads, selecting the appropriate axle is crucial for ensuring safe and efficient towing performance. While the specific guidelines may vary depending on the vehicle and towing requirements, there are general considerations to keep in mind when choosing the right axle. Here’s a detailed explanation of the guidelines for selecting the right axle for towing heavy loads:

Gross Axle Weight Rating (GAWR):

One of the primary factors to consider is the Gross Axle Weight Rating (GAWR) provided by the vehicle manufacturer. The GAWR specifies the maximum weight that an axle is designed to support safely. It is essential to ensure that the selected axle’s GAWR is sufficient to handle the anticipated weight of the loaded trailer and any additional cargo or passengers in the towing vehicle. Exceeding the GAWR can lead to axle failure, compromised handling, and safety risks.

Towing Capacity:

Check the towing capacity of your vehicle, which represents the maximum weight that the vehicle is rated to tow. The axle’s capacity should align with the towing capacity to ensure safe and efficient towing. Consider the type and size of the trailer you intend to tow, including its loaded weight, tongue weight, and any weight distribution considerations. The axle should be capable of handling the anticipated load without exceeding its capacity.

Matching Axle and Suspension:

The axle and suspension system work together to support the weight of the vehicle and the trailer being towed. It is important to ensure that the axle and suspension are properly matched to provide adequate support and stability. Consider the type of suspension (leaf springs, coil springs, air suspension) and the axle’s design (solid axle, independent suspension) to ensure compatibility and optimal towing performance.

Braking System:

When towing heavy loads, the braking system plays a critical role in maintaining control and safety. Ensure that the axle is equipped with appropriate brakes that can handle the increased load. Consider the type of brakes, such as electric brakes or hydraulic brakes, and their capacity to provide sufficient stopping power for the combined weight of the towing vehicle and trailer.

Weight Distribution:

Proper weight distribution is essential for safe towing. The axle should be selected based on the anticipated weight distribution between the towing vehicle and the trailer. Consider factors like tongue weight and the use of weight distribution hitches or sway control devices to ensure balanced weight distribution and optimal handling characteristics.

Consult Manufacturer Recommendations:

Always refer to the vehicle manufacturer’s recommendations, specifications, and guidelines when selecting an axle for towing heavy loads. The manufacturer’s guidelines will provide accurate and vehicle-specific information to help you make the right choice. Consult the owner’s manual or contact the manufacturer directly for any specific towing-related recommendations.

It’s important to note that towing requirements and axle specifications can vary depending on the vehicle make and model, as well as regional regulations. It is advisable to consult with automotive experts, such as mechanics or dealerships, who have expertise in towing and can provide specific recommendations based on your vehicle and towing needs.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

  1. Regular Inspection:
  2. Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

  3. Lubrication:
  4. Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

  5. Seal Inspection and Replacement:
  6. Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

  7. Proper Loading and Towing:
  8. Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

  9. Driving Techniques:
  10. Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

  11. Regular Wheel Alignment:
  12. Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

  13. Proper Tire Inflation:
  14. Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

  15. Service Intervals:
  16. Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

How do solid axles differ from independent axles in terms of performance?

When comparing solid axles and independent axles in terms of performance, there are several key differences to consider. Both types of axles have their advantages and disadvantages, and their suitability depends on the specific application and desired performance characteristics. Here’s a comparison of solid axles and independent axles:

Aspect Solid Axles Independent Axles
Load-Bearing Capability Solid axles have high load-bearing capability due to their robust and sturdy construction. They can handle heavy loads and provide excellent stability, making them suitable for off-road vehicles, heavy-duty trucks, and towing applications. Independent axles typically have lower load-bearing capability compared to solid axles. They are designed for lighter loads and offer improved ride comfort and handling characteristics. They are commonly used in passenger cars, sports cars, and vehicles with a focus on maneuverability and road performance.
Wheel Articulation Solid axles have limited wheel articulation due to their connected and rigid design. This can result in reduced traction and compromised wheel contact with the ground on uneven terrain. However, solid axles provide excellent traction in situations where the weight distribution on all wheels needs to be maintained, such as in off-road or rock-crawling applications. Independent axles offer greater wheel articulation as each wheel can move independently of the others. This allows the wheels to better conform to uneven terrain, maximizing traction and maintaining contact with the ground. Independent axles provide improved off-road capability, enhanced handling, and better ride comfort.
Ride Comfort Due to their rigid design, solid axles generally provide a stiffer and less compliant ride compared to independent axles. They transmit more road shocks and vibrations to the vehicle’s occupants, resulting in a rougher ride quality. Independent axles are known for providing better ride comfort. Each wheel can react independently to road imperfections, absorbing shocks and vibrations more effectively. This leads to a smoother and more comfortable ride, particularly on paved roads and surfaces with minor irregularities.
Handling and Stability Solid axles offer excellent stability due to their connected nature. They provide better resistance to lateral forces, making them suitable for high-speed stability and towing applications. However, the rigid axle design can limit overall handling and maneuverability, particularly in tight corners or during quick direction changes. Independent axles generally offer improved handling and maneuverability. Each wheel can react independently to steering inputs, allowing for better cornering performance and agility. Independent axles are commonly found in vehicles where precise handling and responsive steering are desired, such as sports cars and performance-oriented vehicles.
Maintenance and Repair Solid axles are relatively simpler in design and have fewer moving parts, making them easier to maintain and repair. They are often more resistant to damage and require less frequent servicing. However, if a component within the axle assembly fails, the entire axle may need to be replaced. Independent axles are typically more complex in design and have multiple moving parts, such as control arms, CV joints, or bearings. This complexity can result in higher maintenance and repair costs. However, if a failure occurs, only the affected component needs to be replaced, reducing repair expenses compared to replacing the entire axle.

It’s important to note that advancements in suspension and axle technologies have resulted in various hybrid systems that combine features of solid and independent axles. These systems aim to provide a balance between load-bearing capability, wheel articulation, ride comfort, and handling performance based on specific application requirements.

In summary, solid axles excel in load-bearing capability, stability, and durability, making them suitable for heavy-duty applications and off-road conditions. Independent axles offer improved ride comfort, better wheel articulation, enhanced handling, and maneuverability, making them suitable for passenger cars and vehicles focused on road performance. The choice between solid axles and independent axles depends on the specific needs and priorities of the vehicle or machinery.

China OEM Domi 3 Axles 4 Axle 40-60 Tons Lowboy Lowbed Truck Transport Gooseneck Lowbed Trailer Lowbed Trailer Lowboy Axle   axle bearingChina OEM Domi 3 Axles 4 Axle 40-60 Tons Lowboy Lowbed Truck Transport Gooseneck Lowbed Trailer Lowbed Trailer Lowboy Axle   axle bearing
editor by CX 2023-11-07

China best Bicycle Bottom Bracket Bicycle Parts Bb Sealed Bearing Bicycle Middle Axle cv axle puller

Product Description

Verious types of bicycle BB axle,Bottom bracket axle(new-345)

Product:

B.B. AXLE

 

Brand Name:

Double drogan

 

Material

Steel

 

Finish

CP,UCP,ED

 

Price:

FOB TJ $0.25~0.35/pcs

 

Applicable Bicycle:

Road Bicycle, Traditional Bicycle, MTB Bicycle,

Minimum Order Quantity:

500 Pieces

 

Place of Origin:

ZheJiang

 

Shipping Port:

a). ZheJiang

b). ZheJiang

Packaging Details:

a). 100pcs/Ctn

 b). carton or as your demand

Delivery Time:

a). 25 days after receving the deposit

b). Pls contact with us

Payment Terms:

a). T/T

Supply Ability:

50, 000 pieces per Month

 

Company profile:
ZheJiang Shuanglong Bicycle Industry Co., Ltd., is located in Industrial Development Zone Xihu (West Lake) Dis. County, ZheJiang Province ,400 kilometers away from ZheZheJiang ngang, 600 kilometers away from HangZhou port,60 kilometers away from the ZheJiang -Kowloon Railway and ZheJiang -HangZhou Railway, away from ZheJiang Capital International Airport 450 kilometers, convenient transportation, convenient location.
Our company is a integrated production and marketing enterprise, specializing in the production of bicycle accessories and children bicycle, the company’s technology is strong in well-equipped, products strictly in accordance with ISO standards for production, product support in addition to domestic sales, but also exported to the Middle East, Africa and South-East Asia and other countries and regions, get the deeply customer high praise.
For developing domestic and foreign markets and broad margin, the Company has always adhered to the quality of survival, the principle of development together, in good faith to provide you with accurate product information, purchases of open channels and high-quality and efficient service, hand in hand, create brilliant! 
General manager Rongchun Ran together with all the staff sincerely welcome new and old customer at home and abroad to visit us.

ZheJiang Shuanglong Bicycle Industry Co.,Ltd
Website:shuanglongbicycle
 
 
 

Condition: New
Customized: Non-Customized
Chainwheel Teeth: Custom-Made
Material: Steel
Transport Package: Carton
Trademark: Double drogan
Samples:
US$ 0.35/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Axles

How to Identify an Axle

An axle is the central shaft that rotates a wheel or a gear. The axle may be fixed to a vehicle or to its wheels, and may include bearings for movement. The axle may also be connected to other parts of the vehicle, such as the suspension and steering systems. The axle may also include mounting points for bearings.

Identifying an axle

Identifying an axle is easy if you know what to look for. Identifying the axle is an important part of axle rebuilding. The first step in the process is to determine the make and model of the axle. This can be done by looking for the Bill of Materials number on the right or left tube.
When trying to identify an axle, it helps to know its dimensions, hub pattern, and number of bolts. The width of the axle can also help you determine its type. Wide axles are commonly used on light-duty pickup trucks, while narrow axles are typically found on sports cars. Once you’ve identified the type of axle, you can look for its bolt pattern. The diameter of the axle is another way to identify it.
Axle identification tags can also help you find an axle in a salvage yard. They are usually stamped with information that can help you determine the make, model, and gear ratio of a particular axle. It’s important to note that the tag’s information may change from one year to the next.
If you don’t know where to look for an axle tag, it’s probably a GM vehicle. GM vehicles are equipped with RPO codes, 3-character codes that designate various features of a vehicle. The stickers are usually located near the spare tire or in the glove box compartment. Simply scan the RPO code using your smartphone to obtain this information.
When changing an axle in a truck, it is imperative to identify the rear end first. Differential configurations and shapes can vary greatly, so you must be able to find the right one. Luckily, the process of identifying an axle is simple, and there are several ways to do it. The most common methods for identifying an axle are the axle tag number and the shape of the differential cover.
Axles

Inspection

Axle inspection is an important part of the manufacturing process and must be carried out many times during its working life. There are many ways of inspecting an axle, including visual inspection and ultrasonic testing. Axles come in hollow and solid styles. Their dimensions vary depending on the type of rail that they are attached to. London Underground trains use a type of axle known as a VLU axle.
Inspection of axle flanges should be done at least once a year. The inspection process can vary depending on the type of axle and the type of repair required. Using a magnetic particle inspection can detect cracks in the axle flanges. Another method is HFEC, which detects cracks in the attach bolt holes.
The air springs should also be checked for chafing or damage. The front and rear spring hangers should be free of cracks or excessive movement. The front bushing should also be checked for deterioration and wear. Fasteners should also be checked for looseness and torque. If the fasteners are loose or damaged, replace them immediately.
Axles

Repair

It is important to get regular inspections of your car’s axle to avoid costly repairs. Fortunately, most axle repairs are relatively straightforward. All it takes is a few simple tools and a safe way to prop up your car. However, if you don’t feel confident performing a repair on your own, consider hiring a mechanic for the job.
Axles are one of the most commonly damaged parts of a car, and repairing one can help you keep the car in good shape for years to come. In fact, it can even improve the performance of your tires. If your car is experiencing serious problems, you should seek professional assistance to ensure a safe repair.
If you suspect an axle problem, it’s important to get it checked as soon as possible. Bad axles can cause a bumpy ride, affect tire rotation, cause grease to leak from the wheels, and even lead to a wreck. Ultimately, you’ll want to avoid driving your car if you suspect a problem with its axle.
Your car’s axle may make a clicking noise as it moves. It could also cause vibrations that affect your passengers or even the steering wheel. The axle is an important part of the car because it supports the weight of the car and keeps the wheels in place. If the problem affects your car’s handling, it might be time for an axle replacement.
You can tell if an axle is damaged by excessive vibrations or unusual noises. This can be caused by a number of problems, including overloading the vehicle, bad potholes, or even bad carrier bearings. When you hear this noise, you should seek professional help immediately to ensure the safety of your vehicle and your passengers. A bad axle can cause other car problems as well, such as a faulty ball joint or suspension problems.
China best Bicycle Bottom Bracket Bicycle Parts Bb Sealed Bearing Bicycle Middle Axle   cv axle pullerChina best Bicycle Bottom Bracket Bicycle Parts Bb Sealed Bearing Bicycle Middle Axle   cv axle puller
editor by CX 2023-06-05

China for YAMAHA Blaster200 Banshee350 Yfz350 Raptor660 Yfm125g Tri Z Breeze 93306-00705-00 ATV Quad Parts All Terrain Vehicle Dust Seals Rear Wheel Axle Bearing axle carrier

Solution Description

For CZPT Blaster200 Banshee350 YFZ350 Raptor660 YFM125G Tri Z CZPT 93306-00705-00 ATV Quad Areas All Terrain Vehicle Dust Seals Rear Wheel Axle Bearing

Product Name  ATV Axle Bearing Color  Uncooked and green 
SKU YH-YFM-350-002   As like the photograph shown 
Fitment 

Refer the list 

Weight  .1kg 

 

Package Involves
two pcs x Rear wheel bearing
two pcs x Dust Seals

 Compatible versions:
Match for CZPT Banshee 350 YFZ350 1987-2006
In shape for CZPT Blaster 200 YFS200 1988-2006
Fit for CZPT Raptor 660 YFM660R 2001-2005
Suit for CZPT CZPT a hundred twenty five YFA1 1989-2004
In shape for CZPT Tri Moto, Tri Z 1985-1986
Suit for CZPT Grizzly a hundred twenty five YFM125G 2004-2571

Component No.:
93306-00705-00
93102-43341-00
93106-42026-00

Make sure you Observe:
one) You should validate the compatibility prior to purchasing it.
2) All dimensions are measured by hand, there may be modest deviations.

     YHMOTO has been adhering to the idea of “Born To Custom made” in pursuit of quality because its establishment.The business establish on 2015. We have 4 creation strains to meet up with the demands of distinct clients for customization of various resources and craftsmanship. They are CNC processing creation lines, injection molding, stamping molding, and digital assembly. Tested, we have the potential to offer OEM/ODM services to our customers. The manufacturing unit addresses an region of 1,two hundred square meters and has an office to acquire clients. We can modify for  Harley Honda CZPT BMW Suzuki aftermarket new elements. We have more than 6000 SKU products, the sequence are divided into retro vehicle collection, avenue automobile collection, cruise automobile sequence, ATV and UTV sequence, off-highway vehicle collection, out of doors product collection.

HangZhou XIHU (WEST LAKE) DIS. Investing CO,LTD

 


/ Piece
|
200 Pieces

(Min. Order)

###

Certification: ISO9001, CE, CCC, RoHS
Material: Aluminum
Type: Wheel Bearing
Qty: 1
Color: Raw and Green
Transport Package: Box

###

Samples:
US$ 25/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Product Name  ATV Axle Bearing Color  Raw and green 
SKU YH-YFM-350-002   As like the picture shown 
Fitment 
Refer the list 
Weight  0.1kg 

/ Piece
|
200 Pieces

(Min. Order)

###

Certification: ISO9001, CE, CCC, RoHS
Material: Aluminum
Type: Wheel Bearing
Qty: 1
Color: Raw and Green
Transport Package: Box

###

Samples:
US$ 25/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Product Name  ATV Axle Bearing Color  Raw and green 
SKU YH-YFM-350-002   As like the picture shown 
Fitment 
Refer the list 
Weight  0.1kg 

What Is an Axle?

An axle is the central shaft of a vehicle that rotates a wheel or gear. It may be fixed to the wheels or to the vehicle itself, and can rotate with the wheels and gears. It may include bearings and mounting points. If the axle is fixed to the vehicle, it may have a steering or drive shaft attached.

Rear axle

The rear axle is a crucial part of your vehicle. If it fails to function correctly, it can cause major issues when driving at high speeds. This assembly can be a complicated component, and it is crucial that you find a mechanic who knows how to fix it. Rear axles require periodic gear oil replacement and bearing adjustments.
The rear axle is the final leg of the drivetrain, transferring rotational power from the driveshaft to the rear wheels. While the design of the rear axle varies between vehicles, all axles are designed to follow similar principles. Rear axles may have a single drive shaft or two. The drive shafts are mounted at either end of the axle.
The rear axle ratio is important because it affects how much fuel the truck uses. The lower the ratio, the more fuel-efficient the vehicle is. Higher numbers, like 4:10, are better for towing, but they will decrease fuel economy. When choosing a rear axle ratio, be sure to consider how much weight you’ll be hauling.
The rear axle is the most complicated part of the vehicle. It has many components and may not be easily visible. However, a properly functioning rear axle is essential for maximizing safety and performance. If you have a problem, you should contact a professional for a quick and easy fix. Even minor issues can make a significant difference in how your car or truck functions. A professional will ensure that your vehicle’s rear axle will be up to OEM standards.
Axles

Semi-floating axle

A semi-floating axle is the next step up from a stub axle. Semi-floating axles have a bearing that supports the shaft, which then floats inside the axle casing. These axles are best suited for midsize trucks. They are also lighter than full-floating axles and can be manufactured at a lower cost.
This design is most commonly found on rear-wheel-drive passenger cars and lighter trucks. The semi-floating design also allows for a wider diameter axle shaft, and it can increase axle capacity by increasing the diameter of the axle shaft. It also has a wider offset to accommodate larger tires. It can accommodate any offset, although this is usually only useful in off-road environments.
Semi-floating axles are often made with a tapered end. This helps keep the axel from twisting while providing traction. The rear hub of a semi-floating axle is usually connected to the axel via a big, strong nut. This nut also provides friction on the axel shaft.
A full-floating axle is common in 3/4-ton and 1/2-ton trucks. It is important to note, however, that almost all factory full-floating rear ends use eight-lug wheels. However, this rule is not strictly enforced and some companies, like Czpt, specialize in semi-floating axles and custom axles.
Axles

Drive shaft

A drive shaft is an important part of your vehicle’s drivetrain, which helps to transfer torque from the transmission to the drive wheels. You’ll need to know how it functions in order to properly maintain your car. Fortunately, there are a variety of different parts you can use to upgrade your drive shaft.
In order to improve the performance of your vehicle’s drivetrain, you can replace your existing drive shaft with an upgraded one. These are available in various lengths, so that you can find the right length and fit for your vehicle. Some shafts can even be customized to fit the exact length of your axle.
Generally, short axle shafts are made of solid steel. The longer ones are made of aluminum or carbon fiber. To ensure a smooth and safe ride, they are dynamically balanced to eliminate vibrations. Some models are fitted with giubo joints and universal joints to absorb shock. You can also add flex discs to improve your suspension and dampen the bucking sensation of a drive shaft.
You can tell if your drive shaft needs replacement if you hear a clicking noise while driving. This noise is often audible when the vehicle is turning sharply. You should take your vehicle to a mechanic as soon as you hear this noise, or it could lead to a costly repair. In addition to a clicking noise, your car may also be exhibiting a shuddering or vibrating sensation. If you’re experiencing any of these symptoms, you should take your car in for a checkup by an ASE certified technician. If you ignore these warnings, your car’s drive shaft could separate, causing you a lot of damage.
The drive shaft is attached to the axle flange by a drive shaft bolt. This is an important part of the drivetrain because it’s the only point where the drive shaft will connect to the axle. If the bolt is too long, it could be vulnerable to damage if the washers don’t fit tightly. The drive shaft socket yoke can also be easily damaged when you loosen the bolt.
Axles

U-joint

When you replace a u-joint on an axle, you need to take a few things into consideration. One of these considerations is the type of grease you’re going to use. Some of these greases are better than others, and you should always check for a quality grease before you install a new one. A good grease can help to reduce the friction and improve the temperature resistance of the part.
It’s also important to check the u-joint itself. This is the joint between the axle shaft and the wheel. If it’s not functioning properly, it could cause further problems. You should inspect the u-joint every time you change the oil in your vehicle. You can test its lubrication by pressing on the tire with a pry bar or axle stands. You can also try turning the steering wheel fully to test if the joint is loose.
A u-joint failure can leave your car inoperable, which can make driving a risky proposition. If the drive shaft loosens and falls to the ground, you could lose control of your car and risk being stranded. In some severe cases, the front of the driveshaft can even drop to the ground and lift the rear of the car, pushing the car sideways. It’s vital to check u-joints regularly, as failure of the u-joint can cause costly and frustrating car repairs.
When you notice a bad universal joint, you should consider getting it replaced immediately. The most common symptom of a bad u-joint is a clunking sound during acceleration and deceleration. You may also hear vibrations when the u-joint becomes worn and you drive the car. If you notice these symptoms, contact a qualified technician to perform a proper diagnosis.
China for YAMAHA Blaster200 Banshee350 Yfz350 Raptor660 Yfm125g Tri Z Breeze 93306-00705-00 ATV Quad Parts All Terrain Vehicle Dust Seals Rear Wheel Axle Bearing     axle carrierChina for YAMAHA Blaster200 Banshee350 Yfz350 Raptor660 Yfm125g Tri Z Breeze 93306-00705-00 ATV Quad Parts All Terrain Vehicle Dust Seals Rear Wheel Axle Bearing     axle carrier
editor by CX 2023-03-28

China 3 axle self loading container lifting side loader container 20ft 40 truck shipping trailer container lift with mounted crane axle bearing

Use: Truck Trailer
Sort: Semi-Trailer
Material: Metal
Dimension: as custom-made
Max Payload: 30480KG
Wheel Foundation: 8390+1310+1310 (mm)
Tyre Technical specs: eleven.00R20 12PR 12R22.5 12PR
Axle Model: CZPT (BPW optional)
Axle-load: 24000 kg
Landing Leg: CZPT 28T
Twist Lock: twelve(8)(4)
Items of leaf-spring: ten(8)(4)
Colour: Optional
Certification: CCC.ISO9001
Packaging Information: Bare, or as customer’s require.shipping and delivery information :1, OEM bearing brand name 10x26x8mm Substantial quality Chrome teel 6000zz 6000 2rs deep groove ball bearing By bulk 2,By container 3, China factory source bearing measurement 15x35x11mm deep groove ball bearing 6202 as your need
Port: ZheJiang / HangZhou/HangZhou/ZheJiang port

3 axle self loading container lifting side loader container twenty forty truck shipping trailer container elevate with mounted crane

ItemParameters
Max. lifter capacity(kg)37000
Max. operating selection(mm)4000
Max. stabilizen outreach(mm)3200
Suppress mass(kg)14500
Mass of aspect lifter(kg)7250
Highest grass mass(kg)40000
Define dimension of semi-trailer (L*W*T) (mm)14100*2500*4000
Outline dimension of facet lifter (L*W*T) (mm)1571*2500*2490
Wheel base (mm)8000+1350+1350
Keep track of (entrance axle/rear axle) (mm)1820/1820/1820
Front overhang/Rear overhang (mm)-/2370
Technique angel/Departure angel (°)-/thirteen
Variety12R22.5Tubless type, Marketing! 72V 96V 20KW BLDC electric powered automobile conversion package dc brushless motor from Golden Motor twelve sets
Axle3*13tons axles
Voltage12v
ModelKubota V2403-M-DI-E3B-CSL-one
Electrical power/rotation pace (KW/r/min)36.5/2600
Emission normaloff-street,Euro
ColorationPurple/Yellow/Environmentally friendly/White/Black or client decide on
Appliancce20FT/40FT container

Packaging & F688-ZZ Miniature Flanged Ball Bearing 8x16x4mm F 688 F688 Z F688ZZ Flange Bearing for Cash Counter Delivery
Organization Information

How to Identify an Axle

An axle is the central shaft that rotates a wheel or a gear. The axle may be fixed to a vehicle or to its wheels, and may include bearings for movement. The axle may also be connected to other parts of the vehicle, such as the suspension and steering systems. The axle may also include mounting points for bearings.
Axles

Identifying an axle

Identifying an axle is easy if you know what to look for. Identifying the axle is an important part of axle rebuilding. The first step in the process is to determine the make and model of the axle. This can be done by looking for the Bill of Materials number on the right or left tube.
When trying to identify an axle, it helps to know its dimensions, hub pattern, and number of bolts. The width of the axle can also help you determine its type. Wide axles are commonly used on light-duty pickup trucks, while narrow axles are typically found on sports cars. Once you’ve identified the type of axle, you can look for its bolt pattern. The diameter of the axle is another way to identify it.
Axle identification tags can also help you find an axle in a salvage yard. They are usually stamped with information that can help you determine the make, model, and gear ratio of a particular axle. It’s important to note that the tag’s information may change from one year to the next.
If you don’t know where to look for an axle tag, it’s probably a GM vehicle. GM vehicles are equipped with RPO codes, 3-character codes that designate various features of a vehicle. The stickers are usually located near the spare tire or in the glove box compartment. Simply scan the RPO code using your smartphone to obtain this information.
When changing an axle in a truck, it is imperative to identify the rear end first. Differential configurations and shapes can vary greatly, so you must be able to find the right one. Luckily, the process of identifying an axle is simple, and there are several ways to do it. The most common methods for identifying an axle are the axle tag number and the shape of the differential cover.
Axles

Inspection

Axle inspection is an important part of the manufacturing process and must be carried out many times during its working life. There are many ways of inspecting an axle, including visual inspection and ultrasonic testing. Axles come in hollow and solid styles. Their dimensions vary depending on the type of rail that they are attached to. London Underground trains use a type of axle known as a VLU axle.
Inspection of axle flanges should be done at least once a year. The inspection process can vary depending on the type of axle and the type of repair required. Using a magnetic particle inspection can detect cracks in the axle flanges. Another method is HFEC, which detects cracks in the attach bolt holes.
The air springs should also be checked for chafing or damage. The front and rear spring hangers should be free of cracks or excessive movement. The front bushing should also be checked for deterioration and wear. Fasteners should also be checked for looseness and torque. If the fasteners are loose or damaged, replace them immediately.
Axles

Repair

It is important to get regular inspections of your car’s axle to avoid costly repairs. Fortunately, most axle repairs are relatively straightforward. All it takes is a few simple tools and a safe way to prop up your car. However, if you don’t feel confident performing a repair on your own, consider hiring a mechanic for the job.
Axles are one of the most commonly damaged parts of a car, and repairing one can help you keep the car in good shape for years to come. In fact, it can even improve the performance of your tires. If your car is experiencing serious problems, you should seek professional assistance to ensure a safe repair.
If you suspect an axle problem, it’s important to get it checked as soon as possible. Bad axles can cause a bumpy ride, affect tire rotation, cause grease to leak from the wheels, and even lead to a wreck. Ultimately, you’ll want to avoid driving your car if you suspect a problem with its axle.
Your car’s axle may make a clicking noise as it moves. It could also cause vibrations that affect your passengers or even the steering wheel. The axle is an important part of the car because it supports the weight of the car and keeps the wheels in place. If the problem affects your car’s handling, it might be time for an axle replacement.
You can tell if an axle is damaged by excessive vibrations or unusual noises. This can be caused by a number of problems, including overloading the vehicle, bad potholes, or even bad carrier bearings. When you hear this noise, you should seek professional help immediately to ensure the safety of your vehicle and your passengers. A bad axle can cause other car problems as well, such as a faulty ball joint or suspension problems.
China 3 axle self loading container lifting side loader container 20ft 40 truck shipping trailer container lift with mounted crane     axle bearingChina 3 axle self loading container lifting side loader container 20ft 40 truck shipping trailer container lift with mounted crane     axle bearing
editor by czh 2023-02-26

China Hot Sale Factory Price Manufacturer American Type 16t Assemble Truck Rear Axles for Trailer axle bearing

Solution Description

 

Solution Description

trailer axle Attributes

1). Particular heat-treated, low-alloy steel axle beam, offers more balance, greater capacity and lighter weight.
2). Solid camshafts with hardened put on area for the axle
3). Strong inserted spindle and bearing journals laser heat taken care of, supply excellent exhaustion functionality.
4). Higher overall performance top quality non-asbestos brake linings, prolong services life.
5). Straightforward for Ab muscles installation.

 

Trailer axle specification:

 

Model Max.ability(T) Observe(mm) Brake(mm) Axle beam P.C.D(mm) Complete duration(mm)
CZZDW-10.five 10.5 1820 420×180 φ127 285.seventy five 2165
CZZDW-13 thirteen 1840 420×180 150×150 285.seventy five 2185
CZZDW-15 fifteen 1850 420×180 150×150 335 2185
CZZDW-16 sixteen 1850 420×220 150×150 335 2185
CZZDW-14 fourteen 1840 420×200 150×150 281 2175

observe:
1. Content : Steel

2. Drum, Brake CZPT 420x180mm, Observe TR 1840mm

three.Axle Beam you can select:150*one hundred fifty,127*127,Φ127

four. product sort:American,Germany and Europe variety

5.Max.ability you can choose:12T,13T,14T,15T,16T

six.Stud:ten*M20*1.5

 

Thorough Photographs

 

 

Business Profile

 

Xihu (West Lake) Dis. Changzai Machinery Producing Co., Ltd is 1 of the main manufacturers specializing in the creation of semi-trailer areas, like Axles, Suspension assemblies, Leaf springs, Landing gears, King pins, Fifth wheels, Air brake chambers, Air tanks, Twist locks and so on.  We can offer large quality items with competitive cost and great solutions.

 

Other sales merchandise

 

 

Our support

 

1. Q:What is actually your best cost for this item?

 

A: We are company and will quotation you greatest price tag according to your amount, so when you producing an inquiry, please enable us know the quantity you want.The a lot more quantity the greater price tag.

 

two. Q:How about the quality of this merchandise?

 

A: Our products are accredited to ISO9001, TS16949 international quality specifications. We compay have very rigorous Quality Management Methods.

 

three. Q:What content of the product can you provide?

 

A: Steel 

 

4. Q:What is actually your MOQ? 

 

A: 10pcs for every product. We hope you can acquire a lot more to conserve far more income.

 

5. Q:What is actually the supply time?

 

A: For items that are in inventory, we can ship it within 7 days soon after acquiring your payment. For customized get, quantity in 24 tons, manufacturing time is 12-twenty times soon after confirmed every specifics.

 

6. Q:What is your packing?

 

A:Our normal packing for this product is pallet, we can also supply you packing according to your requirements.

 

seven. Q:Can we personalized our own logo or label on this solution?

 

A: Sure, you can. we support logo print & stamping & label print, print will be free if the emblem is not very sophisticated.

 

8. Q:What about the warranty?

 

A: We are very confident in our items, and we pack them really nicely to make certain the products in effectively security.

 

To stay away from any subsequent difficulties regarding good quality concern, we suggest that you verify the springs once you obtain them. If there is any transportation ruined or high quality concern, do not neglect just take the detail pictrues and get in touch with us as shortly as feasible,we will correctly manage it, make positive your reduction to decrease to the smallest .

 

Our exhibition

 

 

US $500-1,000
/ Piece
|
30 Pieces

(Min. Order)

###

After-sales Service: Yes
Condition: New
Axle Number: 2
Application: Trailer
Certification: ISO
Material: Iron

###

Customization:

###

Model Max.capacity(T) Track(mm) Brake(mm) Axle beam P.C.D(mm) Total length(mm)
CZZDW-10.5 10.5 1820 420×180 φ127 285.75 2165
CZZDW-13 13 1840 420×180 150×150 285.75 2185
CZZDW-15 15 1850 420×180 150×150 335 2185
CZZDW-16 16 1850 420×220 150×150 335 2185
CZZDW-14 14 1840 420×200 150×150 281 2175
US $500-1,000
/ Piece
|
30 Pieces

(Min. Order)

###

After-sales Service: Yes
Condition: New
Axle Number: 2
Application: Trailer
Certification: ISO
Material: Iron

###

Customization:

###

Model Max.capacity(T) Track(mm) Brake(mm) Axle beam P.C.D(mm) Total length(mm)
CZZDW-10.5 10.5 1820 420×180 φ127 285.75 2165
CZZDW-13 13 1840 420×180 150×150 285.75 2185
CZZDW-15 15 1850 420×180 150×150 335 2185
CZZDW-16 16 1850 420×220 150×150 335 2185
CZZDW-14 14 1840 420×200 150×150 281 2175

What Is an Axle?

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Axles

Types of axles

Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Axles

Cost of replacing an axle

Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Axles

Insurance coverage for repairing an axle

Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
China Hot Sale Factory Price Manufacturer American Type 16t Assemble Truck Rear Axles for Trailer     axle bearingChina Hot Sale Factory Price Manufacturer American Type 16t Assemble Truck Rear Axles for Trailer     axle bearing
editor by czh 2022-12-17

China Supplier of CV Axles for All Kinds of Korean Cars Best Price axle bearing

Product Description

CARS TYPES

TOYOTA  COROLLA  TOYOTA  REVO TOYOTA  LEXUS NISSAN TEANA
TOYOTA  CAMRY TOYOTA  YARIS TOYOTA  DYNA NISSAN SUNNY
TOYOTA  HILUX TOYOTA  HIACE TOYOTA  ECHO NISSAN SENTRA
TOYOTA  LANDCRUSER TOYOTA  LANDCRUISER TOYOTA  DYNA NISSAN ALMERA
TOYOTA  RAV4 TOYOTA  FJ TOYOTA  PLATZ NISSAN ALTEMA
TOYOTA  FAN CARGO TOYOTA  SOLUNA TOYOTA  VIOS NISSAN TEANA
HYUNDAI ELANTRA HYUNDAI VERNA HYUNDAI ACCENT HYUNDAI SONATA

Product Description

Our compay always insists high-quality standard producing and continually improve ourselves since the very beginning of company’s establishment, we always contribute to make perfect combination of equipment and technology, made the high stable quality. 

Detailed Photos

Main Products

 

Company Profile

ZheJiang CZPT Macinery equipments is a new developing manufacturing company with 7M$ capital. Producing Auto parts production lines. As well we have 15 years of exporting auto parts for Japanese and Korean automotive products. As after market supplies. Our main products are SHOCK ABSORBING, POWER STEERING SYSTEMS, SUSPENSION, CV AXLE, CV JONTS, and AUTO LIGHTS. We have our own brands and we do customize brand for customers requirements. Our products are produced under quality control team. Two advantage we offer; Genuine parts quality and After market price best value parts. Our products has 98% warranty for 1 year form date of use. Some items are warranty per KM 98% means we accept a claim if the damaged parts more then 2% of the quantity up to manufacturing fault for After Sales Service We have different solutions for different customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with an irresistible force.

Packaging & Shipping

FAQ

1.Are you a factory or a trading company ?
    We are a factory and trading company at the same time.
2.Where is your company located ? How can I visit there ?
    Our company is located in HangZhou, all clients, from home and abroad, are warmly welcomed to visit us .
3.How about the quality of the products ?
    Our products are of high quality and we have registered and reputable brands.
4.What’s the MOQ for each items ?
    50 pieces.
5.Could we supply samples ?
    We offer samples,but the samples should be paid.
6.What’s the delivery time ?
    15-20 working days
7.What’s our shipping ways ?
     We can provide different types of shipping such as sea, air, and land.

US $31-79
/ Piece
|
50 Pieces

(Min. Order)

###

After-sales Service: 1 Year
Condition: New
Color: Black
Certification: ISO, IATF-16949
Type: CV Axle
Application Brand: Nissan, Toyota, Hyundai

###

Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

TOYOTA  COROLLA  TOYOTA  REVO TOYOTA  LEXUS NISSAN TEANA
TOYOTA  CAMRY TOYOTA  YARIS TOYOTA  DYNA NISSAN SUNNY
TOYOTA  HILUX TOYOTA  HIACE TOYOTA  ECHO NISSAN SENTRA
TOYOTA  LANDCRUSER TOYOTA  LANDCRUISER TOYOTA  DYNA NISSAN ALMERA
TOYOTA  RAV4 TOYOTA  FJ TOYOTA  PLATZ NISSAN ALTEMA
TOYOTA  FAN CARGO TOYOTA  SOLUNA TOYOTA  VIOS NISSAN TEANA
HYUNDAI ELANTRA HYUNDAI VERNA HYUNDAI ACCENT HYUNDAI SONATA
US $31-79
/ Piece
|
50 Pieces

(Min. Order)

###

After-sales Service: 1 Year
Condition: New
Color: Black
Certification: ISO, IATF-16949
Type: CV Axle
Application Brand: Nissan, Toyota, Hyundai

###

Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

TOYOTA  COROLLA  TOYOTA  REVO TOYOTA  LEXUS NISSAN TEANA
TOYOTA  CAMRY TOYOTA  YARIS TOYOTA  DYNA NISSAN SUNNY
TOYOTA  HILUX TOYOTA  HIACE TOYOTA  ECHO NISSAN SENTRA
TOYOTA  LANDCRUSER TOYOTA  LANDCRUISER TOYOTA  DYNA NISSAN ALMERA
TOYOTA  RAV4 TOYOTA  FJ TOYOTA  PLATZ NISSAN ALTEMA
TOYOTA  FAN CARGO TOYOTA  SOLUNA TOYOTA  VIOS NISSAN TEANA
HYUNDAI ELANTRA HYUNDAI VERNA HYUNDAI ACCENT HYUNDAI SONATA

What Is an Axle?

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Axles

Types of axles

Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Axles

Cost of replacing an axle

Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Axles

Insurance coverage for repairing an axle

Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
China Supplier of CV Axles for All Kinds of Korean Cars Best Price     axle bearingChina Supplier of CV Axles for All Kinds of Korean Cars Best Price     axle bearing
editor by czh 2022-12-02

China Qualified Customized Stainless Steel Front-Wheel-Axle with Red Anodized Made by Professional CNC Turning Machining Center axle bearing

Product Description

 

Place of Origin HangZhou China
Application Bicycle Accessories, Medical Equipment,Automation Equipment,Automobile Manufacturing, Construction Machinery, Rail Transit,Communication Industry, Consumer Electronics Industry,Instrument Manufacturing,Energy Saving and Environmental Protection Industry,Machine Tool Industry, Safety and Fire Protection Industry, Pneumatic Industry,Motor Industry, Automation Equipment Industry, Industrial Robot Industry,Textile Industry,Furniture, Semiconductor Industry,Transportation Products Industry, etc.
Model number Non-standard
Material Carbon Steel, Alloy Steel, Aluminum Alloy, Stainless Steel, Brass, Copper, Iron,Cast Steel, Thermoplastic, Rubber, Silicone, Bronze, Cupronickel,Magnesium Alloy, Zinc Alloy, Tool Steel, Nickel Alloy, Tin Alloy, Tungsten Alloy,Titanium Alloy,Hastelloy,Cobalt Alloy, Gold, Silver, Platinum,Magnetic Materials Thermosetting Plastics, Foamed Plastics, Carbon Fiber, Carbon Composites
Our Services CNC Machining, Tooling fixtures design and fabrication, Metal sheet fabrication,Stamping, Die casting, Plastic injection, Surface Treatment, Mould, etc.
Drawing Format jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc
Surface Treatment Anodizing, Sandblasting, Painting, Powder Coating, Silk Printing, Brushing, Polishing,Laser Engraving, Electrophoresis, Powder Spraying, Electroless Plating,Electroplating, Sandblasting,  Anodizing, Electrolysis, Laser engraving, Grinding,Shot Blasting, Blackening, Phosphating, Passivationetc.
Testing Machine CMM, 2D Projector, Vernier Caliper, Micrometer Caliper, Roughness Tester,Thread Cauge, Diameter Micrometer, Height Cauge, Hardness Tester, etc.
Packing EPE Foam/ Anti-Rust Paper/ Stretch Film/ Plastic bag +Carton, Wooden Boxes,or as per the customers requirements
Size Customized Sized Acceptable

  Bicycle Accessories, Medical Equipment,Automation Equipment,Automobile Manufacturing, Construction Machinery, Rail Transit,Communication Industry, Consumer Electronics Industry,Instrument Manufacturing,Energy Saving and Environmental Protection Industry,Machine Tool Industry, Safety and Fire Protection Industry, Pneumatic Industry,Motor Industry, Automation Equipment Industry, Industrial Robot Industry,Textile Industry,Furniture, Semiconductor Industry,Transportation Products Industry, etc.

  HangZhou GX Precision Machinery Co., Ltd. is committed to customizing high-precision CNC machining parts.

ABOUT US:
-18 years of machining experience and ISO9 pieces monthly capacity.
-High Precision and Complex Components acceptable.

Our details:
1. The machines we have: 4-axis CNC machining centers, high-speed CNC lathes, automatic lathes, CNC milling machines, turning-milling CZPT machines, precision engraving machines, wire cutting (medium speed wire and slow speed wire), drilling machines, tapping machines, grinders, Welding machine.
2. The materials we can make: carbon steel, stainless steel, aluminum, alloy steel, copper, brass, bronze, plastic and rubber, etc.
3. Surface treatment: anodizing/sandblasting/galvanizing/chrome plating/liquid painting/powder coating/drawing/polishing.
4. Inspection machines: CMM , 2D Projector, Vernier caliper, Micrometer caliper, Roughness tester, Thread cauge, Diameter micrometer, Height cauge, Hardness tester, etc.
5. Delivery time: 1-30 days depending on quantity and processing.
6. Packing: PE film + bubble bag + cardboard box/wooden box
7. Advantages: Low MOQ (5-10 samples can be provided for preliminary inspection.)

Our inspectors carefully check every detail of the product before packaging to ensure that the product meets the customer’s requirements. Our products have been sold to more than 30 countries around the world, including Canada, the United States, France, Italy, Switzerland, Poland, Australia, and New Zealand, etc. Most of our customers benefit from our OEM service. We have been CZPT to provide total solutions for customers in various industries. To find out if we are the right OEM for you, please contact us today.

Q1:How can I get a quote?
Detailed drawings (PDF/STEP/IGS/DWG…) with material, quantity and surface treatment information.

Q2:Can you make machining parts based on our samples?
A2:Yes, we can make measurement based on your samples to make drawings for machining parts making.

Q3: Can you give me help if my products are very urgent?
Yes, We can work overtime and add a few machines to produce these products if you need it urgently.

Q4: What is the shipping method?
Most of the goods were sent out by international airway express company like DHL, UPS, FedEx, TNT.
Usually it takes around 5-7 working days (door to door service). We also can arrange shipment via seaway.
 
Q5: I want to keep our design in secret, can we sign NDA?
Sure, we will not display any customers’ design or show to other people, we can sign NDA.

Q6:Where is your factory?
A3:We are in HangZhou city, China.

 

Condition: New
Certification: CE, RoHS, GS, ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, ANSI, BS
Customized: Customized
Material: Metal
Application: Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery

###

Samples:
US$ 0.99/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Place of Origin Xiamen China
Application Bicycle Accessories, Medical Equipment,Automation Equipment,Automobile Manufacturing, Construction Machinery, Rail Transit,Communication Industry, Consumer Electronics Industry,Instrument Manufacturing,Energy Saving and Environmental Protection Industry,Machine Tool Industry, Safety and Fire Protection Industry, Pneumatic Industry,Motor Industry, Automation Equipment Industry, Industrial Robot Industry,Textile Industry,Furniture, Semiconductor Industry,Transportation Products Industry, etc.
Model number Non-standard
Material Carbon Steel, Alloy Steel, Aluminum Alloy, Stainless Steel, Brass, Copper, Iron,Cast Steel, Thermoplastic, Rubber, Silicone, Bronze, Cupronickel,Magnesium Alloy, Zinc Alloy, Tool Steel, Nickel Alloy, Tin Alloy, Tungsten Alloy,Titanium Alloy,Hastelloy,Cobalt Alloy, Gold, Silver, Platinum,Magnetic Materials Thermosetting Plastics, Foamed Plastics, Carbon Fiber, Carbon Composites
Our Services CNC Machining, Tooling fixtures design and fabrication, Metal sheet fabrication,Stamping, Die casting, Plastic injection, Surface Treatment, Mould, etc.
Drawing Format jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc
Surface Treatment Anodizing, Sandblasting, Painting, Powder Coating, Silk Printing, Brushing, Polishing,Laser Engraving, Electrophoresis, Powder Spraying, Electroless Plating,Electroplating, Sandblasting,  Anodizing, Electrolysis, Laser engraving, Grinding,Shot Blasting, Blackening, Phosphating, Passivationetc.
Testing Machine CMM, 2D Projector, Vernier Caliper, Micrometer Caliper, Roughness Tester,Thread Cauge, Diameter Micrometer, Height Cauge, Hardness Tester, etc.
Packing EPE Foam/ Anti-Rust Paper/ Stretch Film/ Plastic bag +Carton, Wooden Boxes,or as per the customers requirements
Size Customized Sized Acceptable
Condition: New
Certification: CE, RoHS, GS, ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, ANSI, BS
Customized: Customized
Material: Metal
Application: Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery

###

Samples:
US$ 0.99/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Place of Origin Xiamen China
Application Bicycle Accessories, Medical Equipment,Automation Equipment,Automobile Manufacturing, Construction Machinery, Rail Transit,Communication Industry, Consumer Electronics Industry,Instrument Manufacturing,Energy Saving and Environmental Protection Industry,Machine Tool Industry, Safety and Fire Protection Industry, Pneumatic Industry,Motor Industry, Automation Equipment Industry, Industrial Robot Industry,Textile Industry,Furniture, Semiconductor Industry,Transportation Products Industry, etc.
Model number Non-standard
Material Carbon Steel, Alloy Steel, Aluminum Alloy, Stainless Steel, Brass, Copper, Iron,Cast Steel, Thermoplastic, Rubber, Silicone, Bronze, Cupronickel,Magnesium Alloy, Zinc Alloy, Tool Steel, Nickel Alloy, Tin Alloy, Tungsten Alloy,Titanium Alloy,Hastelloy,Cobalt Alloy, Gold, Silver, Platinum,Magnetic Materials Thermosetting Plastics, Foamed Plastics, Carbon Fiber, Carbon Composites
Our Services CNC Machining, Tooling fixtures design and fabrication, Metal sheet fabrication,Stamping, Die casting, Plastic injection, Surface Treatment, Mould, etc.
Drawing Format jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc
Surface Treatment Anodizing, Sandblasting, Painting, Powder Coating, Silk Printing, Brushing, Polishing,Laser Engraving, Electrophoresis, Powder Spraying, Electroless Plating,Electroplating, Sandblasting,  Anodizing, Electrolysis, Laser engraving, Grinding,Shot Blasting, Blackening, Phosphating, Passivationetc.
Testing Machine CMM, 2D Projector, Vernier Caliper, Micrometer Caliper, Roughness Tester,Thread Cauge, Diameter Micrometer, Height Cauge, Hardness Tester, etc.
Packing EPE Foam/ Anti-Rust Paper/ Stretch Film/ Plastic bag +Carton, Wooden Boxes,or as per the customers requirements
Size Customized Sized Acceptable

What Is an Axle?

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Axles

Types of axles

Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Axles

Cost of replacing an axle

Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Axles

Insurance coverage for repairing an axle

Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
China Qualified Customized Stainless Steel Front-Wheel-Axle with Red Anodized Made by Professional CNC Turning Machining Center     axle bearingChina Qualified Customized Stainless Steel Front-Wheel-Axle with Red Anodized Made by Professional CNC Turning Machining Center     axle bearing
editor by czh 2022-11-24