Product Description
Trailer Axle Shaft Spring Axles with 2000-2200lbs 4 lug or 5 lug Hub
Product Features
Trailer coupling device refers to the axle used to connect a trailer (or trailer) to a towing vehicle (or front vehicle). The trailer axle is usually composed of 1 or more roller bearings, which are used to support the weight of the trailer and transmit the power of the towing vehicle to the trailer.
The trailer axle is usually installed on the rear axle of the tractor, with 1 axle connected to the tractor’s drive axle and the other axle connected to the trailer. This connection allows the trailer to follow the tractor at different speeds and travel under different road and load conditions.
|
Hub Face |
88″ |
|
Spring center |
73″ |
|
Capacity Per Axle (LBS) |
2000-2200lbs |
|
Hubs/drums |
4 bolts or 5 bolts hub |
|
PCD |
101.6 or114.3mm |
|
Size |
1/2″ UNF |
|
Tube |
1.75″ hollow tube |
Trailer axle type
Trailer axles are usually divided into 2 different types: spring axles and torsion axles. Although these 2 types of axles perform the same basic work, the way they suspend and buffer trailer loads is completely different.
Spring shaft
The function of the spring axle is to use stacked metal plate springs located below or above the axle beam to support the weight of the trailer. The spring shaft is available in single axis, double axis, and 3 axis configurations. In both dual and triple trailers, the leaf springs are connected through an equalizer. Equalizer helps to distribute the weight of the trailer more evenly across all axles. Spring axles are common on all brands and models of trailers because they are more cost-effective than torque.
Click here to view our comparison of different types of spring shafts.
Torsion axis
Maintaining Trailer Axles
Safety precautions before maintaining trailer axles
Before delving into the maintenance of trailer axles, you should remember the following items. If you are not aware of these things, you may cause serious damage to people near the vehicle and even the products behind the trailer. To give just a few examples, the steps to maintain the trailer axle brakes
The design of the trailer axle is to carry a large amount of load. That’s why it’s necessary to maintain them from time to time. However, trailer axle brakes are very fragile, and unless you have to face axle brake failure, you may not understand their importance. This could be catastrophic.
After driving a trailer for a long time, the axle brakes must be checked elsewhere to ensure the vehicle’s functionality. What you may be interested in is that the axle of a trailer is 1 of the few movable components of the trailer, and if they are not properly maintained, it may cause many problems for the trailer’s movement.
In other aspects, in order to have effective trailer axle brakes, it is necessary to remember the following points:
Ensure that the axle is always clean
The moving parts of the axle should always be kept clean. This is not to say that due to prolonged driving, the axle cannot accommodate dust, but rather the accumulated dust and debris can affect the function of the axle.
Forced water can be used in the hose to reduce the accumulation of dirt around the shaft area.
Clean bearings
To properly clean the bearings around the trailer axle, make sure to remove the wheels from the trailer axle and then remove the hub to properly clean the bearings. You should be aware that depending on your usage of the trailer, solvent cleaning of the bearings is necessary from time to time.
When fixing the wheel hub and bearings, please ensure that they are properly lubricated to prevent damage due to motion friction.
Lubricating the axle
When performing regular maintenance, it is also necessary to lubricate the axles of the trailer. You should note that axle maintenance can ensure the durability of the trailer itself. It also helps to prevent friction around the moving parts of the trailer axle.
| Quantity(pieces) | 1 – 10000 | >10000 |
| Lead time (days) | 7 | To be negotiated |
Certificates and Honors
Packaging & Shipping
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation. If you have another question, please feel free to contact us.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Installation Guide 1-Year Warranty |
|---|---|
| Condition: | New |
| Axle Number: | – |
| Application: | – |
| Certification: | – |
| Material: | Steel |
Where can I buy axle seals for preventing fluid leaks in my vehicle’s axles?
When it comes to purchasing axle seals to prevent fluid leaks in your vehicle’s axles, there are several options available. Here are some places where you can buy axle seals:
1. Automotive Parts Stores:
Visit local automotive parts stores such as AutoZone, Advance Auto Parts, O’Reilly Auto Parts, or NAPA Auto Parts. These stores typically have a wide range of automotive seals, including axle seals, in stock. You can either visit the physical store or check their online catalogs to find the specific axle seal you need for your vehicle.
2. Dealerships:
If you prefer to purchase genuine OEM (Original Equipment Manufacturer) axle seals, consider visiting a dealership authorized by your vehicle’s manufacturer. Dealerships often carry original parts that are specifically designed for your vehicle make and model. Contact your local dealership’s parts department to inquire about the availability of axle seals for your vehicle.
3. Online Retailers:
Online retailers like Amazon, eBay, and RockAuto offer a wide range of automotive parts, including axle seals. These platforms provide the convenience of browsing and purchasing axle seals from the comfort of your home. Make sure to check the product details, specifications, and customer reviews before making a purchase.
4. Local Mechanics and Repair Shops:
Local mechanics and repair shops often have access to a variety of automotive seals, including axle seals. They can source and install the appropriate seals for your vehicle during maintenance or repair services. Reach out to trusted local mechanics or repair shops in your area and inquire about their availability and pricing for axle seals.
5. Manufacturer’s Online Stores:
Some vehicle manufacturers have their own online stores where you can purchase genuine OEM parts, including axle seals. Visit the official website of your vehicle’s manufacturer and look for their online parts store. You can search for the specific axle seal needed for your vehicle using your vehicle identification number (VIN) or the model details.
6. Salvage Yards:
If you are looking for cost-effective options or rare axle seals, salvage yards can be an option. Salvage yards specialize in selling used parts salvaged from vehicles. However, when purchasing from salvage yards, it’s important to carefully inspect the condition and compatibility of the axle seals to ensure they are suitable for your vehicle.
When purchasing axle seals, make sure to provide accurate information about your vehicle’s make, model, and year to ensure you get the correct seals that fit your vehicle’s axle specifications. Additionally, consider factors such as the quality of the seals, warranty options, and return policies when making your purchase decision.
Remember, if you are unsure about the specific axle seals required for your vehicle or need assistance with installation, it is recommended to consult with a qualified mechanic or technician who can guide you in selecting the right seals and ensure proper installation to prevent fluid leaks in your vehicle’s axles.
What is the difference between front and rear axles in a typical vehicle?
In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:
- Position:
- Steering:
- Driving:
- Suspension:
- Load Distribution:
- Driving Characteristics:
The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.
The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.
The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.
Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.
The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.
The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.
It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.
Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.
What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?
Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:
- Unusual Noises:
- Vibrations:
- Uneven Tire Wear:
- Difficulty Steering:
- Visible Damage or Leaks:
- Professional Inspection:
If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.
A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.
Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.
A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.
Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.
If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.
It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.
editor by CX 2024-04-08
China Standard 3-24tons CZPT Rear Heavy Duty Small Boat Trailer Utility Tandem Wheel Hub Shaft Axle axle extender
Product Description
Product Parameters
Hengtian Brand American Trailer Axle
1.HengTian spindle design which is the widely used in the industry with proven performance
2.Low-alloy machined spindles, friction welded seamlessly, and overall heat treating process
3.Axle stubs and brake hubs are all CZPT forging, ensure they are more powerful and better steady
4.Special clone-shape design on the axle-shoulders, lessening stress concentration and enhancing anti-fatigue performance
5.Unique design on axle stubs (with a precise declination angel at both ends) to minimize tire wear
6.National and industry standard compliant set components
7.National Automobile Monitor and Inspection Center certified axle shaft that undergoes over 1.2 million times of Fatigue testing and built to meet or exceed national industry standards.
ZheJiang CZPT Auto Parts Co., Ltd.
Sales manager: Jeff Zhang
Contact Us
Click here for more details~~
Product Pictures
Company Profile
ZheJiang CZPT Auto Parts Co., Ltd. is located in Xihu (West Lake) Dis. County, HangZhou City, ZheJiang Province, with annvestment of 350 mllon yuan, covering an area of 40,000 square meters. It is adjiacent to Shihuang Expressway and307 National Highway in the south, and is connected to Xihu (West Lake) Dis. to the Promise Expressway in the north. Thetransportation is convenient. Our company mainly produces American-style trailers and axles, with an annual output of 150,000 axles. The products are mainly sold to ZheJiang , ZheJiang , ZheJiang , ZheJiang , ZheJiang and other places,and exported to North America,South America, Middle East and Southeast Asia.
Our company has the world’s most advanced production equipment, adopts automatic integral axle extrusiontechnology and step-type heat treatment technology, which makes the axles have the characteristics of “lighterweight, better mechanical performance and higher safety”. In the case of high-intensity transportation, it is easy todeform, bend, and has low fatigue resistance, which prolongs the service life. In the aspect of axle machining, ourcompany adopts high-preclsion double-head CNC lathe to process both ends of the shaft at the same time to ensurethe machining precision of the axle. At the same time, it adopts the most advanced Hawker energy technology in theworld to further improve the fatigue resistance of the bearing position. Introduce automatic welding technology andspecial boring machine to improve welding precision and make the braking performance better after the axle isinstalled. In accordance with the ISO9001 quality management system, the company strictly requires production andinspection, and the product quality is in line with national standards and is in a leading position in the industry.
Our company adheres to the business philosophy of “Quality First, Continuous Improvement, Efforts, Innovation,Professional Integrity, Stable and Reliable, and Win-win Development”. Based on the principle of “survival by qualityand development by reputation”, we will create better products for our customers. We strive to be a reliable andreliable friend and partner of global trailer manufacturers and customers.
Production Equipment
The company introduces advanced new technologies and processes in the industry; adopts domestic advanced and complete production equipment; through the full name automation super link, the entire production process from raw material input to product delivery is closely linked, and the whole process is truly automated. The production capacity and efficiency of the enterprise have been raised to a whole new level.
Warehouse Logistics
The company has strong product warehousing strength and advanced logistics management. The combination of the 2 can It is enough to guarantee the needs of customers in the first time, and truly save time, effort and worry for customers.
Packaging & Shipping
Certifications
Honor is the fruit of hard work and sweat, honor is the witness of strength, honor is the crystallization of the CZPT of countless CZPT people, it is the persistent struggle, the pursuit of innovation and strength, the witness of the journey, and the driving force of CZPT to take off!
Attention:
1. Optional track length available.
2. Optional ABS and automatic slack adjuster available.
3. All the components are in common use of HengTian.
4. Rights of changing product’s design and specification are reserved.
More products and information, please refer to our website: hbhengtian
ZheJiang CZPT Auto Parts Co., Ltd.
Sales manager: Jeff Zhang
Contact Us
Click here for more details~~
FAQ
Q1. Are you a factory or trading company?
A: Yes,we are factory, but not only factory, we also have sales team, own technical team, own after-sale workshop, can help buyers to decide which products are their suitable choice, and all your inquiry will be replyed within 24 hours.
Q2. Could you send me all your catalogues and price list?
A: Please inform me the items, size and packages you are interested in, so we can offer you the price list you need for your reference .
Q3. How does your factory do regarding quality control?
A: Our factory has passed ISO/TS16949, CCC, DOT, ISO, CE Certificate.
Q4. What’s your Delivery Time?
A: In generally, the delivery time is 10 days-15 days after receiving payment. For large quantity it will be checked with production dept. We will make the delivery as soon as possible with the guaranted quality.
Q5. What is payment terms?
A: L/C, T/T, Western Union, and Alibaba Trade Assurance are all accepted, and if you have better idea, please feel free to share with us.
Q6. Which documents can you supply?
A: We usually provide our customers with Commercial Invoice, Price List, Packing List, Origin Certificate, Quality/Quantity Certificate, Beneficary’s Certificate, B/L and others as your request.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Axle |
| Certification: | ISO/TS16949, CCC, DOT, ISO, CE |
| Loading Weight: | 12 Ton 14 Ton 16 Ton 18 Ton |
| ABS: | Optional |
| Samples: |
US$ 360/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can you provide insights into the maintenance of axle bearings for smooth operation?
Maintaining axle bearings is essential for ensuring smooth operation, longevity, and optimal performance of a vehicle’s axle system. Here are some insights into the maintenance of axle bearings:
1. Regular Inspection:
Perform regular visual inspections of the axle bearings to check for any signs of wear, damage, or leaks. Look for indications such as excessive play, unusual noises, vibration, or leakage of grease. Inspections should be carried out as per the manufacturer’s recommended intervals or during routine maintenance checks.
2. Lubrication:
Adequate lubrication is crucial for the smooth operation of axle bearings. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for greasing. Over-greasing or under-greasing can lead to bearing damage or failure. Ensure that the proper amount of grease is applied to the bearings, and use a high-quality grease that is compatible with the axle bearing specifications.
3. Seal Inspection and Replacement:
Check the condition of the axle bearing seals regularly. The seals help to keep contaminants out and retain the lubricating grease within the bearing. If the seals are damaged, worn, or show signs of leakage, they should be replaced promptly to prevent dirt, water, or debris from entering the bearing assembly and causing damage.
4. Proper Installation:
During axle bearing replacement or installation, it is crucial to follow proper procedures to ensure correct seating and alignment. Improper installation can lead to premature bearing failure and other issues. Refer to the manufacturer’s instructions or consult a professional mechanic to ensure proper installation techniques are followed.
5. Load Capacity and Alignment:
Ensure that the axle bearings are properly sized and rated to handle the load capacity of the vehicle and the specific application. Overloading the bearings can lead to excessive wear and premature failure. Additionally, proper wheel alignment is important to prevent uneven bearing wear. Regularly check and adjust the wheel alignment if necessary.
6. Environmental Considerations:
Take into account the operating conditions and environment in which the vehicle is used. Extreme temperatures, exposure to water, dirt, or corrosive substances can affect the performance of axle bearings. In such cases, additional preventive measures may be necessary, such as more frequent inspections, cleaning, and lubrication.
7. Professional Maintenance:
If you are unsure about performing maintenance on axle bearings yourself or if you encounter complex issues, it is recommended to seek assistance from a qualified mechanic or technician who has experience with axle systems. They can provide expert advice, perform necessary repairs or replacements, and ensure proper maintenance of the axle bearings.
By following these maintenance insights, you can help ensure the smooth operation, longevity, and reliability of axle bearings, contributing to the overall performance and safety of the vehicle.
Where can I purchase high-quality replacement axles for my make and model of vehicle?
When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:
- Authorized Dealerships:
- Independent Auto Parts Stores:
- Online Retailers:
- Specialty Performance Retailers:
- Local Salvage Yards:
- Vehicle Manufacturer’s Online Parts Store:
Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.
Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.
Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.
If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.
Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.
Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.
When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.
Can you explain the importance of axle alignment for vehicle stability and handling?
Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:
- Tire Wear and Longevity:
- Optimal Traction:
- Steering Response and Stability:
- Reduced Rolling Resistance:
- Vehicle Safety:
Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.
Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.
Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.
Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.
Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.
To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.
It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.
editor by CX 2024-03-01
China high quality Unbraked Steering Axle 1-15tons for Low Speed Trailer Semi-Trailer SA0019 axle shaft
Product Description
Product: Unbraked Steering Axle 1-15tons for Low speed Trailer semi-trailer SA0019
| Product Parameters | ||||||||||||||||
| Reference | square | Studs (qty/Ø) | PCD | Bearings | Axle load | Max.Overhang | Technical data | |||||||||
| A | B | 25-30km/h | 40km/h | 60km/h | L | L’ | C | E | F | |||||||
| mm | mm | mm | 1 Axle | 2 Axles | 1 Axle | 2 Axles | 1 Axle | 2 Axles | mm | mm | mm | mm | ||||
| 354F | 35 | 4/14 x 1,5 | 85 | 130 | 35714-35716 | 1000 | – | 900 | – | – | – | 200 | – | 164 | 56 | 35 |
| 404F | 40 | 4/14 x 1,5 | 85 | 130 | 35715-35717 | 1500 | – | 1350 | – | – | – | 200 | – | 164 | 64 | 42 |
| 405F | 40 | 5/16 x 1,5 | 94 | 140 | 35715-35717 | 1500 | – | 1350 | – | – | – | 200 | – | 173 | 64 | 52 |
| 404A | 40 | 4/14 x 1,5 | 85 | 130 | 35715-35717 | 1500 | 1200 | 1350 | 1125 | – | – | 200 | – | 164 | 65 | 45 |
| 454A | 45 | 4/14 x 1,5 | 85 | 130 | 35715-35718 | 2000 | 1650 | 1800 | 1500 | 1500 | 1400 | 210 | – | 165 | 79 | 37 |
| 455A | 45 | 5/16 x 1,5 | 94 | 140 | 35715-35718 | 2000 | 1650 | 1800 | 1550 | 1500 | 1400 | 210 | – | 169 | 79 | 37 |
| 504F | 50 | 4/14 x 1,5 | 85 | 130 | 35715-35719 | 3000 | – | 2700 | – | – | – | 180 | – | 172 | 65 | 52 |
| 505F | 50 | 5/16 x 1,5 | 94 | 140 | 35715-35719 | 3000 | – | 2700 | – | – | – | 180 | – | 172 | 65 | 52 |
| 505A | 50 | 5/16 x 1,5 | 94 | 140 | 35716-35719 | 3000 | 2500 | 2700 | 2250 | 2250 | 2100 | 180 | – | 168 | 86 | 47 |
| 506A | 50 | 6/18 x 1,5 | 160 | 205 | 35716-35719 | 3000 | 2500 | 2700 | 2250 | 2250 | 2100 | 180 | – | 240 | 83 | 52 |
| 606XR | 60 | 6/18 x 1,5 | 160 | 205 | 35718-35711 | 5000 | 4150 | 4500 | 4000 | 3750 | 3500 | 190 | 290 | 240 | 91 | 52 |
| 706X | 70 | 6/18 x 1,5 | 160 | 205 | 35719-35713 | 6500 | 5400 | 5850 | 4900 | 4875 | 4550 | 230 | 330 | 260 | 115 | 37 |
| 806X | 80 | 6/18 x 1,5 | 160 | 205 | 32211-35715 | 9100 | 7900 | 8200 | 7500 | 7500 | 6800 | 250 | 350 | 255 | 132 | 52 |
| 808X | 80 | 8/18 x 1,5 | 220 | 275 | 32211-35715 | 9100 | 7900 | 8200 | 7500 | 7500 | 6800 | 250 | 350 | 324 | 132 | 55 |
| 906X | 90 | 6/18 x 1,5 | 160 | 205 | 32211-32017 | 10000 | 8650 | 9000 | 8200 | 8200 | 7500 | 310 | 410 | 255 | 132 | 55 |
| 908X | 90 | 8/18 x 1,5 | 220 | 275 | 32211-32017 | 10000 | 8650 | 9000 | 8200 | 8200 | 7500 | 310 | 410 | 324 | 132 | 55 |
| 908XR | 90 | 8/18 x 1,5 | 220 | 275 | 32217-32217 | 11200 | 9750 | 15710 | 9200 | 9200 | 8400 | 290 | 390 | 325 | 131 | 74 |
| 910XR | 90 | 10/22 x 1,5 | 280 | 335 | 32217-32217 | 11200 | 9750 | 15710 | 9200 | 9200 | 8400 | 290 | 390 | 380 | 131 | 74 |
| 1008X | 100 | 8/18 x 1,5 | 220 | 275 | 32217-32217 | 13400 | 11600 | 12000 | 11000 | 11000 | 10000 | 320 | 420 | 325 | 131 | 74 |
| 1571X | 100 | 10/22 x 1,5 | 280 | 335 | 32217-32217 | 13400 | 11600 | 12000 | 11000 | 11000 | 10000 | 320 | 420 | 380 | 131 | 74 |
| 1571XR | 100 | 10/22 x 1,5 | 280 | 335 | 32219-32219 | 14500 | 12600 | 13000 | 11800 | 11800 | 10800 | 300 | 400 | 380 | 147 | 88 |
| 1110X | 110 | 10/22 x 1,5 | 280 | 335 | 32219-32219 | 14500 | 12600 | 13000 | 11800 | 11800 | 10800 | 400 | 500 | 380 | 147 | 88 |
| 1210X | 120 | 10/22 x 1,5 | 280 | 335 | 32219-32219 | 15000 | 13000 | 13500 | 13000 | 13000 | 11250 | 490 | 590 | 380 | 147 | 88 |
| 1510X (1) | 150 | 10/22 x 1,5 | 280 | 335 | 32219-32219 | 15000 | 13000 | 13500 | 13000 | 13000 | 11250 | 500 | 600 | 380 | 147 | 88 |
FAQ:
Q. Are you manufacturer? What is the aim of your company?
A. Yes. CZPT Asia has been producing agricultural and industrial axles and suspensions since the year 2006. Our aim is to
provide only high quality Axles and Suspensions with accesories to global clients but with competitive prices.
Q. Where is your factory?
A. We are located in HangZhou, ZheJiang , China. Welcome to visit us.
Q. How many years have you been in this business line?
A. We have 20 years experience for production of Agricultural and Industrial products, Our products are enjoying good reputation
from more than 20 countries.
Q. What is your brand?
A. ROC is our own brand, CZPT Asia is affiliated to the France CZPT Group (Est. 1971), it is a whole-owned subsidiary
company of France CZPT Group in China.
Q. Can you accept OEM ?
A. Yes, OEM is acceptable, We can sell products without ROC logo.
Q. How do you ensure the quality?
A. We have strict QC process:
1) Before production, Check strictly the raw material quality.
2) During the half production, We check the finished product quality.
3) Before shipment, We test every product and check defects. Any products with defects won’t be loaded.
More details, Please check with our sales team.
Q. What about your M.O.Q ?
A. Our minimum order value is USD500. For smaller order, please check particularly with our sales team.
Q. What is the lead time?
A. Within 40 days for 40ft container. Within 30 days for 20ft container.
Q. What about your payment terms?
A. We accept various terms, including T/T , L/C , Western Union, etc. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | Rear Axles, Axle |
| Certification: | ISO/TS16949, ASTM, CE, DIN, ISO |
| Loading Weight: | 10T |
| ABS: | With ABS |
| Samples: |
US$ 30/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Are there guidelines for choosing the right axle for towing heavy loads?
When it comes to towing heavy loads, selecting the appropriate axle is crucial for ensuring safe and efficient towing performance. While the specific guidelines may vary depending on the vehicle and towing requirements, there are general considerations to keep in mind when choosing the right axle. Here’s a detailed explanation of the guidelines for selecting the right axle for towing heavy loads:
Gross Axle Weight Rating (GAWR):
One of the primary factors to consider is the Gross Axle Weight Rating (GAWR) provided by the vehicle manufacturer. The GAWR specifies the maximum weight that an axle is designed to support safely. It is essential to ensure that the selected axle’s GAWR is sufficient to handle the anticipated weight of the loaded trailer and any additional cargo or passengers in the towing vehicle. Exceeding the GAWR can lead to axle failure, compromised handling, and safety risks.
Towing Capacity:
Check the towing capacity of your vehicle, which represents the maximum weight that the vehicle is rated to tow. The axle’s capacity should align with the towing capacity to ensure safe and efficient towing. Consider the type and size of the trailer you intend to tow, including its loaded weight, tongue weight, and any weight distribution considerations. The axle should be capable of handling the anticipated load without exceeding its capacity.
Matching Axle and Suspension:
The axle and suspension system work together to support the weight of the vehicle and the trailer being towed. It is important to ensure that the axle and suspension are properly matched to provide adequate support and stability. Consider the type of suspension (leaf springs, coil springs, air suspension) and the axle’s design (solid axle, independent suspension) to ensure compatibility and optimal towing performance.
Braking System:
When towing heavy loads, the braking system plays a critical role in maintaining control and safety. Ensure that the axle is equipped with appropriate brakes that can handle the increased load. Consider the type of brakes, such as electric brakes or hydraulic brakes, and their capacity to provide sufficient stopping power for the combined weight of the towing vehicle and trailer.
Weight Distribution:
Proper weight distribution is essential for safe towing. The axle should be selected based on the anticipated weight distribution between the towing vehicle and the trailer. Consider factors like tongue weight and the use of weight distribution hitches or sway control devices to ensure balanced weight distribution and optimal handling characteristics.
Consult Manufacturer Recommendations:
Always refer to the vehicle manufacturer’s recommendations, specifications, and guidelines when selecting an axle for towing heavy loads. The manufacturer’s guidelines will provide accurate and vehicle-specific information to help you make the right choice. Consult the owner’s manual or contact the manufacturer directly for any specific towing-related recommendations.
It’s important to note that towing requirements and axle specifications can vary depending on the vehicle make and model, as well as regional regulations. It is advisable to consult with automotive experts, such as mechanics or dealerships, who have expertise in towing and can provide specific recommendations based on your vehicle and towing needs.
How do axle ratios impact the performance and fuel efficiency of a vehicle?
The axle ratio of a vehicle plays a crucial role in determining its performance characteristics and fuel efficiency. Here’s a detailed explanation of how axle ratios impact these aspects:
Performance:
The axle ratio refers to the ratio of the number of rotations the driveshaft makes to the number of rotations the axle makes. A lower axle ratio, such as 3.23:1, means the driveshaft rotates 3.23 times for every rotation of the axle, while a higher ratio, like 4.10:1, indicates more driveshaft rotations per axle rotation.
A lower axle ratio, also known as a numerically higher ratio, provides better low-end torque and acceleration. This is because the engine’s power is multiplied as it goes through the gears, resulting in quicker acceleration from a standstill or at lower speeds. Vehicles with lower axle ratios are commonly found in trucks and performance-oriented vehicles where quick acceleration and towing capacity are desired.
On the other hand, a higher axle ratio, or numerically lower ratio, sacrifices some of the low-end torque for higher top-end speed and fuel efficiency. Vehicles with higher axle ratios are typically used in highway driving scenarios where maintaining higher speeds and maximizing fuel efficiency are prioritized.
Fuel Efficiency:
The axle ratio directly affects the engine’s RPM (revolutions per minute) at a given vehicle speed. A lower axle ratio keeps the engine running at higher RPMs, which may result in increased fuel consumption. However, this ratio can provide better towing capabilities and improved off-the-line acceleration.
In contrast, a higher axle ratio allows the engine to operate at lower RPMs during cruising speeds. This can lead to improved fuel efficiency because the engine doesn’t have to work as hard to maintain the desired speed. It’s worth noting that other factors, such as engine efficiency, aerodynamics, and vehicle weight, also influence fuel efficiency.
Manufacturers carefully select the axle ratio based on the vehicle’s intended purpose and desired performance characteristics. Some vehicles may offer multiple axle ratio options to cater to different driving preferences and requirements.
It’s important to consider that changing the axle ratio can have implications on the overall drivetrain system. Modifying the axle ratio can affect the vehicle’s speedometer accuracy, transmission shifting points, and may require recalibration of the engine control unit (ECU) to maintain optimal performance.
As always, for precise information on a specific vehicle’s axle ratio and its impact on performance and fuel efficiency, it is best to consult the vehicle manufacturer’s specifications or consult with automotive experts.
Can you explain the importance of axle alignment for vehicle stability and handling?
Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:
- Tire Wear and Longevity:
- Optimal Traction:
- Steering Response and Stability:
- Reduced Rolling Resistance:
- Vehicle Safety:
Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.
Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.
Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.
Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.
Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.
To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.
It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.
editor by CX 2024-02-15
China DARO made American style truck trailer rear axle 13ton 16 ton 20ton semi trailer axles axle shaft
Use: Trailer Components
Areas: Trailer Axles
OE NO.: DRGA16
Max Payload: 16. We will get in touch with you as quickly as we see it.six.Could you make sure you give us with the specs of the merchandise?Of course, CZPT Series 250W 500W 1000W 1500W 3000W 5000W Hub Motor 36V 48V 60V 72V DC Motor for Electric powered Bicycle please select the corresponding item product in our solution catalog.
What Is an Axle?
An axle is the central shaft of a vehicle that rotates a wheel or gear. It may be fixed to the wheels or to the vehicle itself, and can rotate with the wheels and gears. It may include bearings and mounting points. If the axle is fixed to the vehicle, it may have a steering or drive shaft attached.
Rear axle
The rear axle is a crucial part of your vehicle. If it fails to function correctly, it can cause major issues when driving at high speeds. This assembly can be a complicated component, and it is crucial that you find a mechanic who knows how to fix it. Rear axles require periodic gear oil replacement and bearing adjustments.
The rear axle is the final leg of the drivetrain, transferring rotational power from the driveshaft to the rear wheels. While the design of the rear axle varies between vehicles, all axles are designed to follow similar principles. Rear axles may have a single drive shaft or two. The drive shafts are mounted at either end of the axle.
The rear axle ratio is important because it affects how much fuel the truck uses. The lower the ratio, the more fuel-efficient the vehicle is. Higher numbers, like 4:10, are better for towing, but they will decrease fuel economy. When choosing a rear axle ratio, be sure to consider how much weight you’ll be hauling.
The rear axle is the most complicated part of the vehicle. It has many components and may not be easily visible. However, a properly functioning rear axle is essential for maximizing safety and performance. If you have a problem, you should contact a professional for a quick and easy fix. Even minor issues can make a significant difference in how your car or truck functions. A professional will ensure that your vehicle’s rear axle will be up to OEM standards.
Semi-floating axle
A semi-floating axle is the next step up from a stub axle. Semi-floating axles have a bearing that supports the shaft, which then floats inside the axle casing. These axles are best suited for midsize trucks. They are also lighter than full-floating axles and can be manufactured at a lower cost.
This design is most commonly found on rear-wheel-drive passenger cars and lighter trucks. The semi-floating design also allows for a wider diameter axle shaft, and it can increase axle capacity by increasing the diameter of the axle shaft. It also has a wider offset to accommodate larger tires. It can accommodate any offset, although this is usually only useful in off-road environments.
Semi-floating axles are often made with a tapered end. This helps keep the axel from twisting while providing traction. The rear hub of a semi-floating axle is usually connected to the axel via a big, strong nut. This nut also provides friction on the axel shaft.
A full-floating axle is common in 3/4-ton and 1/2-ton trucks. It is important to note, however, that almost all factory full-floating rear ends use eight-lug wheels. However, this rule is not strictly enforced and some companies, like Czpt, specialize in semi-floating axles and custom axles.
Drive shaft
A drive shaft is an important part of your vehicle’s drivetrain, which helps to transfer torque from the transmission to the drive wheels. You’ll need to know how it functions in order to properly maintain your car. Fortunately, there are a variety of different parts you can use to upgrade your drive shaft.
In order to improve the performance of your vehicle’s drivetrain, you can replace your existing drive shaft with an upgraded one. These are available in various lengths, so that you can find the right length and fit for your vehicle. Some shafts can even be customized to fit the exact length of your axle.
Generally, short axle shafts are made of solid steel. The longer ones are made of aluminum or carbon fiber. To ensure a smooth and safe ride, they are dynamically balanced to eliminate vibrations. Some models are fitted with giubo joints and universal joints to absorb shock. You can also add flex discs to improve your suspension and dampen the bucking sensation of a drive shaft.
You can tell if your drive shaft needs replacement if you hear a clicking noise while driving. This noise is often audible when the vehicle is turning sharply. You should take your vehicle to a mechanic as soon as you hear this noise, or it could lead to a costly repair. In addition to a clicking noise, your car may also be exhibiting a shuddering or vibrating sensation. If you’re experiencing any of these symptoms, you should take your car in for a checkup by an ASE certified technician. If you ignore these warnings, your car’s drive shaft could separate, causing you a lot of damage.
The drive shaft is attached to the axle flange by a drive shaft bolt. This is an important part of the drivetrain because it’s the only point where the drive shaft will connect to the axle. If the bolt is too long, it could be vulnerable to damage if the washers don’t fit tightly. The drive shaft socket yoke can also be easily damaged when you loosen the bolt.
U-joint
When you replace a u-joint on an axle, you need to take a few things into consideration. One of these considerations is the type of grease you’re going to use. Some of these greases are better than others, and you should always check for a quality grease before you install a new one. A good grease can help to reduce the friction and improve the temperature resistance of the part.
It’s also important to check the u-joint itself. This is the joint between the axle shaft and the wheel. If it’s not functioning properly, it could cause further problems. You should inspect the u-joint every time you change the oil in your vehicle. You can test its lubrication by pressing on the tire with a pry bar or axle stands. You can also try turning the steering wheel fully to test if the joint is loose.
A u-joint failure can leave your car inoperable, which can make driving a risky proposition. If the drive shaft loosens and falls to the ground, you could lose control of your car and risk being stranded. In some severe cases, the front of the driveshaft can even drop to the ground and lift the rear of the car, pushing the car sideways. It’s vital to check u-joints regularly, as failure of the u-joint can cause costly and frustrating car repairs.
When you notice a bad universal joint, you should consider getting it replaced immediately. The most common symptom of a bad u-joint is a clunking sound during acceleration and deceleration. You may also hear vibrations when the u-joint becomes worn and you drive the car. If you notice these symptoms, contact a qualified technician to perform a proper diagnosis.
editor by czh 2023-03-17
China construction machinery axle 2 speed go kart trike cv rear differential hydraulic drive axle 7000lb kit atv shaft trailer with Best Sales
Design: 5411
Yr: 1977-1982
Car Fitment: Universal
Design Variety: common
Automobile Make: common
OE NO.: common
Guarantee: Months
Shade: Personalized Coloration
content: metal metal
motor: AC Motor
wheel: a lot of sizes options
solution dimension: tailored size
type: beneath chassis
Steering: electric powered
Brake Method: drum brake
Charging time: 4-8H
Pace: 10-50km/h
Packaging Information: wooden box packing
Port: HangZhou
Item Overview development machinery axle 2 velocity go kart trike cv rear differential hydraulic push axle 7000lb package atv shaft trailer Attributes AT A Look Solution Technical specs
| Item | Data | ||
| length | customization | ||
| width | customization | ||
| height | customization | ||
What Is an Axle?
An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Types of axles
Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Cost of replacing an axle
Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Insurance coverage for repairing an axle
Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
editor by czh 2023-03-08
China Axle American Type Axle Disc Brake Type Shaft Axles for Semi Trailer axle end caps
Product Description
Axle American Type axle Disc Brake variety Shaft Axles for semi trailer
In depth Images
Solution Parameters
| Model | Capability(kg) | Keep track of(mm) | Axle Tube(mm) | PCD(mm) | Complete Duration(mm) | Advised Wheel |
| FYAA-Y11T | 11000 | 1820 | ○127 | 335 | 2165 | 7.5V-20 |
| FYAA-Y13T | 13000 | 1840 | ○127 | 335 | 2185 | 7.5V-20 |
| FYAA-F13T | 13000 | 1840 | one hundred fifty*150 | 335 | 2185 | 7.5V-twenty |
| FYAA-F14T | 14000 | 1840 | one hundred fifty*150 | 335 | 2185 | seven.5V-20 |
| FYAA-F16T | 16000 | 1850 | one hundred fifty*a hundred and fifty | 335 | 2205 | 8.00V-20 |
| FYAA-F20T | 20000 | 1850 | one hundred fifty*one hundred fifty | 335 | 2252 | 8.00V-20 |
Famous:
1. The Trailer Axle track can be custom-made according to consumer specifications
two. Axles can put in Abs brake.
3. Axles can put in Air brake chamber
Live photographs
Connected merchandise and FAQ
Apart from AXLE, we nevertheless have other item series, all variety of semi-trailers, container trailers, tippers, bulk powder tanker and gasoline tanker, sanitation vehicles and relating parts.
. Extended Life span
· Fast Shipping and delivery
· Online Payment
· Small Get Welcome
· 100%water-resistant
· After Saled Support 24*7
what is actually the MOQ?
Different MOQ is to various goods.No quantity restricted for the sample get.
How lengthy will it just take to excute my buy?
It relies upon on the purchase quantity and models.
How to deal with the defective?
To begin with,all product top quality manage systerm and defective charge will be considerably less than .2%.Secondly,if regrettably you received quality
difficulty goods inside guarantee period of time, just get photo or video clip of faulty,and make contact with our salesman, substitute will be free of charge
or extra to your subsequent get.
How about the transportation?
Air shipping,categorical,sea delivery are all offered.
How to get in touch with?
Welcome to get in touch with us on the internet in Trademanger and Skype/Whatsapp/Wechat/E-mail.
|
US $320-510 / Piece | |
10 Pieces (Min. Order) |
###
| After-sales Service: | Lifetime |
|---|---|
| Warranty: | 12 Months |
| Type: | Axle |
| Certification: | ISO/TS16949, ISO |
| Loading Weight: | 11t/13t/14t/16t/20t |
| ABS: | Selectable |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Capacity(kg) | Track(mm) | Axle Tube(mm) | PCD(mm) | Total Length(mm) | Recommended Wheel |
| FYAA-Y11T | 11000 | 1820 | ○127 | 335 | 2165 | 7.5V-20 |
| FYAA-Y13T | 13000 | 1840 | ○127 | 335 | 2185 | 7.5V-20 |
| FYAA-F13T | 13000 | 1840 | 150*150 | 335 | 2185 | 7.5V-20 |
| FYAA-F14T | 14000 | 1840 | 150*150 | 335 | 2185 | 7.5V-20 |
| FYAA-F16T | 16000 | 1850 | 150*150 | 335 | 2205 | 8.00V-20 |
| FYAA-F20T | 20000 | 1850 | 150*150 | 335 | 2252 | 8.00V-20 |
|
US $320-510 / Piece | |
10 Pieces (Min. Order) |
###
| After-sales Service: | Lifetime |
|---|---|
| Warranty: | 12 Months |
| Type: | Axle |
| Certification: | ISO/TS16949, ISO |
| Loading Weight: | 11t/13t/14t/16t/20t |
| ABS: | Selectable |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Capacity(kg) | Track(mm) | Axle Tube(mm) | PCD(mm) | Total Length(mm) | Recommended Wheel |
| FYAA-Y11T | 11000 | 1820 | ○127 | 335 | 2165 | 7.5V-20 |
| FYAA-Y13T | 13000 | 1840 | ○127 | 335 | 2185 | 7.5V-20 |
| FYAA-F13T | 13000 | 1840 | 150*150 | 335 | 2185 | 7.5V-20 |
| FYAA-F14T | 14000 | 1840 | 150*150 | 335 | 2185 | 7.5V-20 |
| FYAA-F16T | 16000 | 1850 | 150*150 | 335 | 2205 | 8.00V-20 |
| FYAA-F20T | 20000 | 1850 | 150*150 | 335 | 2252 | 8.00V-20 |
Understanding the Working of an Axle
An axle is the central shaft of a rotating gear or wheel. It can be fixed to wheels or to the vehicle and can rotate along with them. The axle may include a number of bearings and other mounting points. Axles are essential for the operation of many types of vehicles. To understand the working of an axle, you should understand its basic purpose.
Vehicles with two axles
There are many different types of vehicles, but most are characterized by having two axles. Two axles are common in SUVs, trucks, and other vehicles that are meant to be off-road or for light hauling. Vehicles with two axles also include light-duty cargo vans and passenger cars.
There are many different kinds of two-axle vehicles, ranging from bicycles to motorcycles. In the United States, the most common kind of two-axle vehicles are pickup trucks, SUVs, and sedans. Three-axle vehicles are also common, with the largest type being tractor-trailers. Four-axle vehicles are rare, though. Some class 8 trucks have two-axle tractors.
Two-axle vehicles typically have two axles, with one axle supporting each of the two wheels. Other types of vehicles have three or four axles. The more axles a vehicle has, the more stability it has and the more weight it can handle. Two-axle vehicles are common, but three-axle vehicles are popular in transporting large cargo. Some are even designed with raised axles.
The number of axles on a car depends on its size and purpose. A car has a front axle and a rear axle. The front axle steers the vehicle, and the rear axle powers the wheels. The number of axles in a truck is largely dependent on its size and load, and some trucks have as many as four.
The front axle and rear axle are connected by a drive shaft. The driveshaft connects to the engine, which turns the axles. The two axles transfer the power from the engine to the wheels, and they may also help drive the vehicle. Axles are essential components of a vehicle, and should be strong and durable.
Axles are also important for a vehicle’s turning radius. Heavy-duty vehicles, such as semi-trucks, have large turning radii. Because they run across the width of the vehicle, axles make it possible for the wheels to turn freely. In addition to allowing the wheels to turn, they also support the weight of the vehicle.
Typical vehicles with two axles include the Toyota Rav4 and the Ford Mustang. The Rav4 uses two axles in front and rear-wheel drive. The Ford Mustang, on the other hand, has a live rear axle. In addition, the Mustang is also two axles. A tandem axle is an arrangement of two rear axles close together. It is a popular style in large vehicles.
Vehicles with three axles
There are many different types of vehicles with three axles. Some of the most common include the dump truck, Greyhound bus, and tractor-trailer. Vehicles with three axles are generally heavier than four-axle vehicles. Vehicles with three axles have two sets of wheels – one front and one back. For example, a heavy truck will have three rear axles, a semi-trailer will have two front axles, and a tow truck will have two drive axles and two steer axles.
A vehicle’s axle count can vary. A simple method of figuring out the number of axles in a vehicle is to count the wheels. There are many ways to find out the number of axles on a vehicle. You can also look in the owner’s manual or ask a mechanic. If you’re unsure, ask someone who knows how to tell if a vehicle has three or four axles.
The design of a vehicle’s axles has several benefits. One of these benefits is its ability to disperse weight across a larger area, thereby reducing the risk of the vehicle sinking into soft ground. Dump trucks often drive to delivery sites with the third axle raised, lowering it only when it’s time to cross a soft area.
The number of axles in a vehicle is a crucial factor in determining how much power it needs to move. Different vehicles are designed to handle different terrains and have different axles to match their needs. For example, two-axle vehicles have two front axles, while three-axle vehicles have three rear axles.
A front axle is located at the front of the vehicle and helps with steering and processing road shocks. A front axle is often made of carbon steel, while a stub axle is a fixed axle that supports only one wheel. The front axle is connected to the stub axle through a kingpin.
Vehicles with three axles are generally larger than two axle vehicles. However, some two-axle vehicles can be three-axle, especially if they have a trailer. The design of a vehicle with three axles depends on what type of trailer it has. A two-axle trailer will usually have a trailer attached to it, and the rear axle will be responsible for moving power from the differential to the rear wheels.
Unlike semi-floating axles, full-floating axles are supported by two large bearings. They’re used for larger vehicles with high towing capacities. They also help with wheel alignment. A three-quarter floating axle is more complex than a semi-floating axle, and is often found in mid-size trucks.
There are also vehicles with a middle axle. Figures 2 and 3 illustrate this arrangement. The front and rear axles support most of the weight of the vehicle and the secondary axle has almost no ground weight. The secondary axle has a ground weight that is only 8.5% of the vehicle’s unloaded weight. The wheels of the vehicle remain in contact with the ground. Leaf spring 1 is coupled to the middle secondary axle.
Types of axles
There are several different types of axles, and each is different in function. Some have bearings on each end, while others don’t. These two types of axles have different strengths and weaknesses, so it’s important to know which one is right for you. The best axle for your vehicle depends on your driving needs and budget.
The most basic type of axle is the axle shaft. This is the most inexpensive kind of axle. It connects the wheel hub to the axle shaft. The axle shaft is attached to the wheel hub by bolts. The wheel axle sits in the middle of the axle shaft. The bearings and axle casing transfer the weight of the wheel to the axle. The bearings are designed to distribute the weight evenly on both sides of the axle.
Another type of axle is the reverse Czpt stub axle. It is similar to the standard Czpt stub axle, but the reverse Czpt is designed with an L-shaped spindle. The rear axles also come in different types. These depend on how they are mounted on the vehicle. There are three different types of rear axles: rigid axles, semi-floating axles, and floating axles.
A full floating axle, on the other hand, does not support the weight of the vehicle. It is attached to the wheel hub and axle housing. It is most common in trucks and heavy duty vehicles. These axles are also the most durable, but they can only handle a heavy load. If the axle shaft breaks or is damaged, the vehicle will drop.
The type of axles a vehicle has is important because it affects the turning radius. A single axle vehicle has one drive axle at the rear, while a tandem vehicle has two drives. This means that the vehicle has a larger turning radius than a single axle one. There are also a variety of designs that allow it to turn at higher speeds and with less torque.
Lastly, a dead front axle is an immovable front axle, not revolving with the wheels. It is protected by housings and is a good choice for vehicles that cannot be driven in wet conditions. They provide the driving power from the Axles to the front wheels. The Czpt type uses a kingpin, while the Lamoine type uses a yoke-type hinge.
Three quarter floating axles are a hybrid between a full and semi floating axle. In this type, the axle is attached to the hub through bearings. As a result, it eliminates the shearing stress of the axle and focuses on bending loads. These axles are cheaper than the semi-floating type, and they are used in lighter trucks.
A semi-floating axle, on the other hand, has a bearing inside its axle casing. This axle is a lightweight option that still supports all the vehicle’s weight. This axle is generally used on light-duty pickups and mid-size trucks.
editor by czh 2022-12-29
China 2-3 Axle Side Wall with Front Board Semi Trailer axle shaft
Item Description
3 Axle Facet Wall Open Semi Trailer for Sale
Discription:
one. Product: LAT9400E
2. More than 19 a long time professional manufacturer knowledge
3. Be developed according to your specifications
4. CCC ISO9001 WMI SGS BV SONCAP settlement
five. Tiny order can be approved
6.12 month good quality guarantee time period
7. We acknowledge a hundred% inspection, welcome to our manufacturing facility at any time
| Product Specs | |
| Model amount | LAT9400 |
| Rated Load | 45000 kg |
| Tare Excess weight | 8000 kg |
| Wheel Base | 7180+1310+1310 (mm) |
| Tyre Technical specs | 1100R20-eighteen/12R22.5-18 |
| No. Of the Tyres | twelve |
| Axle Brand name | FUWA (BPW optional) |
| No. Of the Axles | 3 |
| Axle-load | 24000 kg |
| King Pin | fifty#/ninety# |
| Landing Leg | 28ton |
| Pieces of leaf-spring | ten (8) |
| Suspension | Impartial stamping steel rigid suspension ( air suspension) |
| Departure Angle | fourteen.five |
| Front/Rear Overhang | 2100 mm |
| Exterior Proportions (LxWxH) | 13000X2500X2990 (mm) |
| Inside Dimensions (LxWxH) | 12820X2350X600 (mm) |
| Substance of the Main Beam | Q345B manganese plates, automatic submerged arc welded |
| Brake Program | Twin line braking program /Stomach muscles |
| Brake Air Chamber | Six double chamber |
| Electrical | 24V 7 techniques(7 wire harness) |
| Usage | Suitable for the mid/long distance transportation of the mid/hefty duty and bulk cargo. |
|
Other Descriptions |
The complete physique adopts steel with excellent top quality, and be produced by advanced expertise and rigorous producing managerial processes. The body is wearing composition, webs manufactured from manganese plates from 400mm to 550mm higher welded the higher and decrease flangeplates collectively, and the beam operates via the longitudinal beam can make the 2 areas a very strong unit by computerized submerged arc welding. Frame using peen-forming processing. |
Comments of our customers:
Our consumers are all in excess of Kenya, Tunisia, Saudi Arabia, Philippine, Myanmar, Vietnam,
Bangladesh, Tanzania, Congo, Nigeria, Russia, and many others.
About one thousand overseas customers are using the automobiles, which we developed and made
They mainly give us good opinions.
Company information
We are direct producer and we have robust creating potential and R&D capacity!Our uncooked materials and OEM elements such as axle, suspension, tyre, are obtained centralizedly by popular brand , every node will be inspected strickly. Moreover, advanced gear rather than only worker is been utilized in the course of the complete making approach to guarantee the welding qulity.
Your questions,we will anwser:
1. Can i have samples of this kind of trailer to take a look at the high quality?
Sure, you can acquire any samples to examination the quality,our MOQ is 1 set.
two. What’s the delivery time and can you decrease the value?
It relies upon on your buy. The shipping and delivery time is inside 15 workdays following we acquired your prepayment. If you have place an buy of big quantities, then ,of course, the price can be reduced.
3. Can i customize the portray and the trailer design?
Sure, we offer custom-made design and style and logo for sensible type.
four. What’s the payment strategy?
TT 30% as Deposit, Harmony Just before shipment by TT or L/C at sight
five.How do you guarantee its top quality?
We are immediate factory and we have professional good quality inspector.We will not let any imperfections departure from our factory.
Packing & Shipping
We transportation the semi trailers by bulk or container. Our factory possesses long-expression cooperation with ship agency which can supply you cheapest delivery price.
After Sale service:
|
Item Name |
Warranty |
Item Title |
Warranty |
|||
|
Major Frame |
FRAME |
1 Calendar year |
Operating Gear |
AXLE |
6 MONTHS |
|
|
SUSPENSION |
six MONTHS |
AXLE BEARING |
3 MONTHS |
|||
|
KING PIN |
one Calendar year |
WHEEL HUB |
three MONTHS |
|||
|
Harmony ARM |
3 MONTHS |
TIRE |
six MONTHS |
|||
|
Product Identify |
Warranty |
Item Title |
Guarantee |
|||
|
BRAKING System |
BRAKE DRUM |
3 MONTHS |
Help System |
LXIHU (WEST LAKE) DIS. Equipment |
six MONTHS |
|
|
BRKE CHAMBER |
3 MONTHS |
SPARE WHEEL Provider |
six MONTHS |
|||
|
AIR RESERVOIR |
six MONTHS |
|||||
|
Item Identify |
Guarantee |
|||||
|
Other people |
LEAF SPRING |
3 MONTHS |
||||
|
BRAKE CHAMBER DIAPHRAGM |
3 MONTHS |
|||||
|
Unexpected emergency RELAY VALVE |
3 MONTHS |
|||||
|
BRAKE SHOE |
three MONTHS |
|||||
|
RELAY VALVE |
3 MONTHS |
|||||
Remember to make contact with us for a lot more details
24hours on the web,waiting around for your sort inquire.
Welcome to our manufacturing unit,We will pick up you from the airport.
| Type: | Semi-Trailer |
|---|---|
| Certification: | ISO9001, CCC |
| Wheel Base: | 8000-9000mm |
| Tread: | 1820mm |
| Grade: | Medium Duty |
| Independent Suspension Type: | Cross Arm Type |
###
| Customization: |
Available
|
|---|
###
| Product Specifications | |
| Model number | LAT9400 |
| Rated Load | 45000 kg |
| Tare Weight | 8000 kg |
| Wheel Base | 7180+1310+1310 (mm) |
| Tyre Specifications | 1100R20-18/12R22.5-18 |
| No. Of the Tyres | 12 |
| Axle Brand | FUWA (BPW optional) |
| No. Of the Axles | 3 |
| Axle-load | 24000 kg |
| King Pin | 50#/90# |
| Landing Leg | 28ton |
| Pieces of leaf-spring | 10 (8) |
| Suspension | Independent stamping steel rigid suspension ( air suspension) |
| Departure Angle | 14.5 |
| Front/Rear Overhang | 2100 mm |
| Outside Dimensions (LxWxH) | 13000X2500X2990 (mm) |
| Interior Dimensions (LxWxH) | 12820X2350X600 (mm) |
| Material of the Main Beam | Q345B manganese plates, automatic submerged arc welded |
| Brake System | Dual line braking system /ABS |
| Brake Air Chamber | Six double chamber |
| Electrical | 24V 7 ways(7 wire harness) |
| Usage | Suitable for the mid/long distance transportation of the mid/heavy duty and bulk cargo. |
|
Other Descriptions |
The whole body adopts steel with good quality, and be manufactured by advanced skills and strict producing managerial processes. The frame is wearing structure, webs made from manganese plates from 400mm to 550mm high welded the upper and lower flangeplates together, and the beam runs through the longitudinal beam makes the two parts a very strong unit by automatic submerged arc welding. Frame using peen-forming processing. |
###
|
ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
|||
|
MAIN FRAME |
FRAME |
1 YEAR |
RUNNING GEAR |
AXLE |
6 MONTHS |
|
|
SUSPENSION |
6 MONTHS |
AXLE BEARING |
3 MONTHS |
|||
|
KING PIN |
1 YEAR |
WHEEL HUB |
3 MONTHS |
|||
|
BALANCE ARM |
3 MONTHS |
TIRE |
6 MONTHS |
|||
|
ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
|||
|
BRAKING DEVICE |
BRAKE DRUM |
3 MONTHS |
SUPPORT DEVICE |
LANDING GEAR |
6 MONTHS |
|
|
BRKE CHAMBER |
3 MONTHS |
SPARE WHEEL CARRIER |
6 MONTHS |
|||
|
AIR RESERVOIR |
6 MONTHS |
|||||
|
ITEM NAME |
WARRANTY |
|||||
|
OTHERS |
LEAF SPRING |
3 MONTHS |
||||
|
BRAKE CHAMBER DIAPHRAGM |
3 MONTHS |
|||||
|
EMERGENCY RELAY VALVE |
3 MONTHS |
|||||
|
BRAKE SHOE |
3 MONTHS |
|||||
|
RELAY VALVE |
3 MONTHS |
|||||
| Type: | Semi-Trailer |
|---|---|
| Certification: | ISO9001, CCC |
| Wheel Base: | 8000-9000mm |
| Tread: | 1820mm |
| Grade: | Medium Duty |
| Independent Suspension Type: | Cross Arm Type |
###
| Customization: |
Available
|
|---|
###
| Product Specifications | |
| Model number | LAT9400 |
| Rated Load | 45000 kg |
| Tare Weight | 8000 kg |
| Wheel Base | 7180+1310+1310 (mm) |
| Tyre Specifications | 1100R20-18/12R22.5-18 |
| No. Of the Tyres | 12 |
| Axle Brand | FUWA (BPW optional) |
| No. Of the Axles | 3 |
| Axle-load | 24000 kg |
| King Pin | 50#/90# |
| Landing Leg | 28ton |
| Pieces of leaf-spring | 10 (8) |
| Suspension | Independent stamping steel rigid suspension ( air suspension) |
| Departure Angle | 14.5 |
| Front/Rear Overhang | 2100 mm |
| Outside Dimensions (LxWxH) | 13000X2500X2990 (mm) |
| Interior Dimensions (LxWxH) | 12820X2350X600 (mm) |
| Material of the Main Beam | Q345B manganese plates, automatic submerged arc welded |
| Brake System | Dual line braking system /ABS |
| Brake Air Chamber | Six double chamber |
| Electrical | 24V 7 ways(7 wire harness) |
| Usage | Suitable for the mid/long distance transportation of the mid/heavy duty and bulk cargo. |
|
Other Descriptions |
The whole body adopts steel with good quality, and be manufactured by advanced skills and strict producing managerial processes. The frame is wearing structure, webs made from manganese plates from 400mm to 550mm high welded the upper and lower flangeplates together, and the beam runs through the longitudinal beam makes the two parts a very strong unit by automatic submerged arc welding. Frame using peen-forming processing. |
###
|
ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
|||
|
MAIN FRAME |
FRAME |
1 YEAR |
RUNNING GEAR |
AXLE |
6 MONTHS |
|
|
SUSPENSION |
6 MONTHS |
AXLE BEARING |
3 MONTHS |
|||
|
KING PIN |
1 YEAR |
WHEEL HUB |
3 MONTHS |
|||
|
BALANCE ARM |
3 MONTHS |
TIRE |
6 MONTHS |
|||
|
ITEM NAME |
WARRANTY |
ITEM NAME |
WARRANTY |
|||
|
BRAKING DEVICE |
BRAKE DRUM |
3 MONTHS |
SUPPORT DEVICE |
LANDING GEAR |
6 MONTHS |
|
|
BRKE CHAMBER |
3 MONTHS |
SPARE WHEEL CARRIER |
6 MONTHS |
|||
|
AIR RESERVOIR |
6 MONTHS |
|||||
|
ITEM NAME |
WARRANTY |
|||||
|
OTHERS |
LEAF SPRING |
3 MONTHS |
||||
|
BRAKE CHAMBER DIAPHRAGM |
3 MONTHS |
|||||
|
EMERGENCY RELAY VALVE |
3 MONTHS |
|||||
|
BRAKE SHOE |
3 MONTHS |
|||||
|
RELAY VALVE |
3 MONTHS |
|||||
What Is an Axle?
An axle is the central shaft of a vehicle that rotates a wheel or gear. It may be fixed to the wheels or to the vehicle itself, and can rotate with the wheels and gears. It may include bearings and mounting points. If the axle is fixed to the vehicle, it may have a steering or drive shaft attached.
Rear axle
The rear axle is a crucial part of your vehicle. If it fails to function correctly, it can cause major issues when driving at high speeds. This assembly can be a complicated component, and it is crucial that you find a mechanic who knows how to fix it. Rear axles require periodic gear oil replacement and bearing adjustments.
The rear axle is the final leg of the drivetrain, transferring rotational power from the driveshaft to the rear wheels. While the design of the rear axle varies between vehicles, all axles are designed to follow similar principles. Rear axles may have a single drive shaft or two. The drive shafts are mounted at either end of the axle.
The rear axle ratio is important because it affects how much fuel the truck uses. The lower the ratio, the more fuel-efficient the vehicle is. Higher numbers, like 4:10, are better for towing, but they will decrease fuel economy. When choosing a rear axle ratio, be sure to consider how much weight you’ll be hauling.
The rear axle is the most complicated part of the vehicle. It has many components and may not be easily visible. However, a properly functioning rear axle is essential for maximizing safety and performance. If you have a problem, you should contact a professional for a quick and easy fix. Even minor issues can make a significant difference in how your car or truck functions. A professional will ensure that your vehicle’s rear axle will be up to OEM standards.
Semi-floating axle
A semi-floating axle is the next step up from a stub axle. Semi-floating axles have a bearing that supports the shaft, which then floats inside the axle casing. These axles are best suited for midsize trucks. They are also lighter than full-floating axles and can be manufactured at a lower cost.
This design is most commonly found on rear-wheel-drive passenger cars and lighter trucks. The semi-floating design also allows for a wider diameter axle shaft, and it can increase axle capacity by increasing the diameter of the axle shaft. It also has a wider offset to accommodate larger tires. It can accommodate any offset, although this is usually only useful in off-road environments.
Semi-floating axles are often made with a tapered end. This helps keep the axel from twisting while providing traction. The rear hub of a semi-floating axle is usually connected to the axel via a big, strong nut. This nut also provides friction on the axel shaft.
A full-floating axle is common in 3/4-ton and 1/2-ton trucks. It is important to note, however, that almost all factory full-floating rear ends use eight-lug wheels. However, this rule is not strictly enforced and some companies, like Czpt, specialize in semi-floating axles and custom axles.
Drive shaft
A drive shaft is an important part of your vehicle’s drivetrain, which helps to transfer torque from the transmission to the drive wheels. You’ll need to know how it functions in order to properly maintain your car. Fortunately, there are a variety of different parts you can use to upgrade your drive shaft.
In order to improve the performance of your vehicle’s drivetrain, you can replace your existing drive shaft with an upgraded one. These are available in various lengths, so that you can find the right length and fit for your vehicle. Some shafts can even be customized to fit the exact length of your axle.
Generally, short axle shafts are made of solid steel. The longer ones are made of aluminum or carbon fiber. To ensure a smooth and safe ride, they are dynamically balanced to eliminate vibrations. Some models are fitted with giubo joints and universal joints to absorb shock. You can also add flex discs to improve your suspension and dampen the bucking sensation of a drive shaft.
You can tell if your drive shaft needs replacement if you hear a clicking noise while driving. This noise is often audible when the vehicle is turning sharply. You should take your vehicle to a mechanic as soon as you hear this noise, or it could lead to a costly repair. In addition to a clicking noise, your car may also be exhibiting a shuddering or vibrating sensation. If you’re experiencing any of these symptoms, you should take your car in for a checkup by an ASE certified technician. If you ignore these warnings, your car’s drive shaft could separate, causing you a lot of damage.
The drive shaft is attached to the axle flange by a drive shaft bolt. This is an important part of the drivetrain because it’s the only point where the drive shaft will connect to the axle. If the bolt is too long, it could be vulnerable to damage if the washers don’t fit tightly. The drive shaft socket yoke can also be easily damaged when you loosen the bolt.
U-joint
When you replace a u-joint on an axle, you need to take a few things into consideration. One of these considerations is the type of grease you’re going to use. Some of these greases are better than others, and you should always check for a quality grease before you install a new one. A good grease can help to reduce the friction and improve the temperature resistance of the part.
It’s also important to check the u-joint itself. This is the joint between the axle shaft and the wheel. If it’s not functioning properly, it could cause further problems. You should inspect the u-joint every time you change the oil in your vehicle. You can test its lubrication by pressing on the tire with a pry bar or axle stands. You can also try turning the steering wheel fully to test if the joint is loose.
A u-joint failure can leave your car inoperable, which can make driving a risky proposition. If the drive shaft loosens and falls to the ground, you could lose control of your car and risk being stranded. In some severe cases, the front of the driveshaft can even drop to the ground and lift the rear of the car, pushing the car sideways. It’s vital to check u-joints regularly, as failure of the u-joint can cause costly and frustrating car repairs.
When you notice a bad universal joint, you should consider getting it replaced immediately. The most common symptom of a bad u-joint is a clunking sound during acceleration and deceleration. You may also hear vibrations when the u-joint becomes worn and you drive the car. If you notice these symptoms, contact a qualified technician to perform a proper diagnosis.
editor by czh 2022-12-19
China American Type Trailer Axle Shaft Outboard Drum Trailer Steering Axle axle car
Product Description
| Item | Length (mm) | Wheel Base(mm) | Width of the Trailer(mm) | Loading Weight(kg) |
| CJAR330 | 1500 | 1370 | 1550 | 780 |
| CJAR520 | 1700 | 1570 | 1750 | 1000 |
| CJAR580 | 2000 | 1870 | 2100 | 1700 |
HangZhouU Machinery Co., Ltd. is located in the hometown of civilized trailers at home and abroad. It is a modern
comprehensive enterprise integrating design, research and development, production and sales. Since its establishment,
the company has always adhered to the business philosophy of customer first and CZPT cooperation, and has won the
support and trust of a large number of new and old customers. The company now mainly produces and sells: axles
(American, German), suspension (American, German), outriggers (linkage, single-action), air reservoirs, rope tensioners
, 50,90 traction pin traction saddles, brake air The products are exported to Southeast Asia, Africa, South America, Europe
and other countries and regions. We sincerely welcome friends from all walks of life to discuss cooperation and seek
common development.
|
US $200 / Piece | |
1 Piece (Min. Order) |
###
| Condition: | New |
|---|---|
| Axle Number: | 2 |
| Application: | Trailer |
| Certification: | ASTM, CE, ISO |
| Material: | Steel |
| Type: | Axle Bearing |
###
| Customization: |
Available
|
|---|
###
| Item | Length (mm) | Wheel Base(mm) | Width of the Trailer(mm) | Loading Weight(kg) |
| CJAR330 | 1500 | 1370 | 1550 | 780 |
| CJAR520 | 1700 | 1570 | 1750 | 1000 |
| CJAR580 | 2000 | 1870 | 2100 | 1700 |
|
US $200 / Piece | |
1 Piece (Min. Order) |
###
| Condition: | New |
|---|---|
| Axle Number: | 2 |
| Application: | Trailer |
| Certification: | ASTM, CE, ISO |
| Material: | Steel |
| Type: | Axle Bearing |
###
| Customization: |
Available
|
|---|
###
| Item | Length (mm) | Wheel Base(mm) | Width of the Trailer(mm) | Loading Weight(kg) |
| CJAR330 | 1500 | 1370 | 1550 | 780 |
| CJAR520 | 1700 | 1570 | 1750 | 1000 |
| CJAR580 | 2000 | 1870 | 2100 | 1700 |
An Axle is a Simple Machine For Amplifying Force
An axle is the central shaft that connects the drive wheels of a vehicle. It transmits power from the engine to the wheels and absorbs braking and acceleration forces. It may also contain bearings. Learn more about the important functions of the axle in your vehicle. Its simple design makes it an efficient machine for amplifying force.
An axle is a rod or shaft that connects to the drive wheels
An axle is a rod or shaft that is fixed to the drive wheels of a vehicle. It provides support and rotates with the wheels. Generally, a vehicle has two axles. However, larger vehicles can have more. The type of axle used will depend on how much torque and speed the wheels need to travel.
Drive axles are crucial to the operation of a car. They transfer power from the engine to the wheels, so they must be strong and durable. They also need to be able to support the weight of the vehicle and resist accelerated forces. The drive axle is usually connected to a driveshaft, which extends upward into the transmission and connects with the engine.
There are two main types of axles: front wheel drive (FWD) and rear wheel drive (RWD). The former type is common in passenger vehicles, while the latter type is more common for trucks and cars. The rear wheel drive (RWD) axle connects to the drive wheels, while the front-wheel drive (FWD) axle transfers power from the transaxle differential to the wheels.
Modern drive axles consist of short rods with a flexible rubber boot covering the CV joint. The rubber boot helps to prevent dirt and grease from getting into the CV joint. The increased complexity of the drive axle increases the risk that something goes wrong with it. However, this increases the car’s traction, ride quality, and handling.
A car’s axles are designed by engineers to be extremely strong. They must be able to withstand thousands of pounds of weight, while operating under high levels of friction. But no drive axle is invincible; they will break if the vehicle is overloaded or too heavy.
The rear axle is connected to the engine and rotates with the wheels. The front axle helps with steering and absorbs road shocks. Typically, this part is made of carbon steel and nickel steel.
It absorbs braking and acceleration forces
The Axle is an important part of a vehicle’s suspension. It is responsible for absorbing braking and acceleration forces. Axle roll centres are located on the transversal vertical plane, through the center of each wheel. This is the point at which lateral force applied to the sprung mass is transferred to the unsprung mass, a process known as transfer of momentum. This force coupling point is also known as the Neutral Roll Axis.
An axle’s role in a vehicle goes beyond absorbing braking and acceleration forces. It also serves as a weight transfer device, reducing the stress on the joints of a vehicle. Its design has evolved over time to meet a variety of requirements. It must be durable and able to absorb braking and acceleration forces, while providing the right amount of structural support.
A potential diagram can be used to benchmark tyre performance. The data entered can include suspension geometry and load distributions. The lateral force potential of a tyre is calculated for each individual tyre in an axle, and the values obtained for a constant steer angle are also included.
Optimal energy recovery is crucial for absorbing braking forces and meeting the total braking force required for a given deceleration. Figure 11 shows the braking forces for the front and rear axles over a certain range when j/g = m. The thick solid line ab represents this range.
In addition to braking and acceleration forces, an axle’s lateral force capacity is limited by lateral load transfer. If one axle fails to absorb lateral forces, it might break loose and skid before the other. This can lead to understeer and oversteer. This is why it is not a good idea to put unsprung weight on a vehicle’s axle.
It transmits power from the engine to the wheels
The axle is an integral part of a vehicle’s drive system. It transmits power from the engine to the wheels. Different types of axles have different roles in transmission of power from the engine to the wheels. The drive shaft is the main component of an axle, connecting the engine and the wheels.
A vehicle’s axle transmits power from the engine to the rear wheels. The power is transferred through the gears to move the car forward. The inner wheel of a bicycle pedal powers the back wheel, while the outer wheel moves at a different speed. Similarly, the power from the engine is transmitted to the wheels by a car’s crankshaft and driveshaft.
The type of axle you choose depends on the size of the vehicle and its purpose. Standard axles are suitable for most vehicles, while customized axles are best suited for high-performance vehicles. Customized axles give you more control over the wheel speed and torque. It’s important to know about the types and sizes of axles to choose the right one for your vehicle.
A differential is another vital component of the drivetrain. It allows the power from the engine to reach both wheels, which allows the vehicle to accelerate and decelerate. A differential also compensates for the difference in tyre speeds on curved roads. By using a differential, you can increase the speed of the wheels and improve your car’s handling.
The differential between the front and rear axles is called a bevel ring gear. Its input shaft is supported by a ball race mounted in the axle casing. The other part of the differential is called the input helical gear. The two sun gears are connected by cross-pins.
It is a simple machine for amplifying force
A simple machine is one that increases the output of force without altering the input force. For example, a lever increases force but does not create new energy. Therefore, it is necessary to balance the work input and output. It is important to keep in mind that friction can reduce energy.
Using a simple machine, you can perform various tasks. For example, you can use it to cut and pry apart objects. This type of machine involves a wheel and an axle, which have a smaller radius than the wedge. The force applied by the wheel pushes the two pieces apart.
Another simple machine that amplifies force is a gearbox. The earliest gearboxes were used to lift buckets or weights from wells. The large gear is attached to a smaller one by a hinge. The smaller gear increases the force of the larger one, allowing the small gear to lift much larger loads.
A wheel and axle is a simple machine that uses mechanical advantage to change force. A wheel is a circular disk, and an axle is a rod through the center. The mechanical advantage is a result of the combination of torque and angular momentum to work against the force of gravity. In addition, this machine is closely related to gears.
Simple machines are a great way to compare the magnitude of forces, as they use similar mechanisms. One of the oldest examples of a simple machine is a wheel and axle. A wheel is fixed to an axle, and the axle is fixed to a vertical surface. The force generated by the wheel will be proportional to the distance between the two spools.
Another simple machine that amplifies force is a lever. A lever uses a beam or a rigid rod that can pivot on its fulcrum. It is an effective tool for shifting heavy loads, and also for applying force. It also reduces the friction of a vehicle while preserving its momentum.
editor by czh 2022-11-26
China Made in China tandem trailer axle kit rear axle shaft axle equalizer
Use: Trailer Parts
Parts: Trailer Axles
OE NO.: can provide
Max Payload: 20t
Size: 1840mm, 1840mm
Material: steel
Product Name: axle semi trailer
Color: Custom’s Requirement
MOQ: 1pc (usually 1 20 container can bear 54pcs 1840mm axles)
Model: HT-02
Delivery date: 7 day
Capacity: 13T 15T 16T
OE NO: OEM
Package: Standard Package
Packaging Details: wooden pallet packaging
Port: HangZhou
Detailed Images Product Paramenters High Quality Trailer Axle: 1>American type axle and Germany type axle are available2>Drum outboard axles and inboard axles are available3> Spoke type axle is also available4>Any Track Length is available5> Heavy duty and light duty axle for kinds of trailers
| Material | steel |
| Size | 1840mm |
| Product type | agricultural trailer axle |
| Color | Custom’s Requirement |
| MOQ | 1pc (usually 1 20 container can bear 54 pcs 1840mm axles) |
| Delivery date | 7 day |
| Capacity | 13T 15T 16T |
What Is an Axle?
An axle is the central shaft of a vehicle that rotates a wheel or gear. It may be fixed to the wheels or to the vehicle itself, and can rotate with the wheels and gears. It may include bearings and mounting points. If the axle is fixed to the vehicle, it may have a steering or drive shaft attached.
Rear axle
The rear axle is a crucial part of your vehicle. If it fails to function correctly, it can cause major issues when driving at high speeds. This assembly can be a complicated component, and it is crucial that you find a mechanic who knows how to fix it. Rear axles require periodic gear oil replacement and bearing adjustments.
The rear axle is the final leg of the drivetrain, transferring rotational power from the driveshaft to the rear wheels. While the design of the rear axle varies between vehicles, all axles are designed to follow similar principles. Rear axles may have a single drive shaft or two. The drive shafts are mounted at either end of the axle.
The rear axle ratio is important because it affects how much fuel the truck uses. The lower the ratio, the more fuel-efficient the vehicle is. Higher numbers, like 4:10, are better for towing, but they will decrease fuel economy. When choosing a rear axle ratio, be sure to consider how much weight you’ll be hauling.
The rear axle is the most complicated part of the vehicle. It has many components and may not be easily visible. However, a properly functioning rear axle is essential for maximizing safety and performance. If you have a problem, you should contact a professional for a quick and easy fix. Even minor issues can make a significant difference in how your car or truck functions. A professional will ensure that your vehicle’s rear axle will be up to OEM standards.
Semi-floating axle
A semi-floating axle is the next step up from a stub axle. Semi-floating axles have a bearing that supports the shaft, which then floats inside the axle casing. These axles are best suited for midsize trucks. They are also lighter than full-floating axles and can be manufactured at a lower cost.
This design is most commonly found on rear-wheel-drive passenger cars and lighter trucks. The semi-floating design also allows for a wider diameter axle shaft, and it can increase axle capacity by increasing the diameter of the axle shaft. It also has a wider offset to accommodate larger tires. It can accommodate any offset, although this is usually only useful in off-road environments.
Semi-floating axles are often made with a tapered end. This helps keep the axel from twisting while providing traction. The rear hub of a semi-floating axle is usually connected to the axel via a big, strong nut. This nut also provides friction on the axel shaft.
A full-floating axle is common in 3/4-ton and 1/2-ton trucks. It is important to note, however, that almost all factory full-floating rear ends use eight-lug wheels. However, this rule is not strictly enforced and some companies, like Czpt, specialize in semi-floating axles and custom axles.
Drive shaft
A drive shaft is an important part of your vehicle’s drivetrain, which helps to transfer torque from the transmission to the drive wheels. You’ll need to know how it functions in order to properly maintain your car. Fortunately, there are a variety of different parts you can use to upgrade your drive shaft.
In order to improve the performance of your vehicle’s drivetrain, you can replace your existing drive shaft with an upgraded one. These are available in various lengths, so that you can find the right length and fit for your vehicle. Some shafts can even be customized to fit the exact length of your axle.
Generally, short axle shafts are made of solid steel. The longer ones are made of aluminum or carbon fiber. To ensure a smooth and safe ride, they are dynamically balanced to eliminate vibrations. Some models are fitted with giubo joints and universal joints to absorb shock. You can also add flex discs to improve your suspension and dampen the bucking sensation of a drive shaft.
You can tell if your drive shaft needs replacement if you hear a clicking noise while driving. This noise is often audible when the vehicle is turning sharply. You should take your vehicle to a mechanic as soon as you hear this noise, or it could lead to a costly repair. In addition to a clicking noise, your car may also be exhibiting a shuddering or vibrating sensation. If you’re experiencing any of these symptoms, you should take your car in for a checkup by an ASE certified technician. If you ignore these warnings, your car’s drive shaft could separate, causing you a lot of damage.
The drive shaft is attached to the axle flange by a drive shaft bolt. This is an important part of the drivetrain because it’s the only point where the drive shaft will connect to the axle. If the bolt is too long, it could be vulnerable to damage if the washers don’t fit tightly. The drive shaft socket yoke can also be easily damaged when you loosen the bolt.
U-joint
When you replace a u-joint on an axle, you need to take a few things into consideration. One of these considerations is the type of grease you’re going to use. Some of these greases are better than others, and you should always check for a quality grease before you install a new one. A good grease can help to reduce the friction and improve the temperature resistance of the part.
It’s also important to check the u-joint itself. This is the joint between the axle shaft and the wheel. If it’s not functioning properly, it could cause further problems. You should inspect the u-joint every time you change the oil in your vehicle. You can test its lubrication by pressing on the tire with a pry bar or axle stands. You can also try turning the steering wheel fully to test if the joint is loose.
A u-joint failure can leave your car inoperable, which can make driving a risky proposition. If the drive shaft loosens and falls to the ground, you could lose control of your car and risk being stranded. In some severe cases, the front of the driveshaft can even drop to the ground and lift the rear of the car, pushing the car sideways. It’s vital to check u-joints regularly, as failure of the u-joint can cause costly and frustrating car repairs.
When you notice a bad universal joint, you should consider getting it replaced immediately. The most common symptom of a bad u-joint is a clunking sound during acceleration and deceleration. You may also hear vibrations when the u-joint becomes worn and you drive the car. If you notice these symptoms, contact a qualified technician to perform a proper diagnosis.
editor by czh